TRENDnet TV-IP302PI Audio/Video Setting Video Setting, ∙ Basic Mode of Streaming 1 and Streaming

Page 28

TRENDnet User’s Guide

Audio/Video Setting >> Video Setting

∙Video Settings

TV-IP302PI

Select the Video System (digital signal) and TV Output (analog signal).

∙Basic Mode of Streaming 1 and Streaming 2:

Resolution: 1280x800, 1280x720 , 640x480, 320x240, or 176x144

Quality: The higher the quality is, the bigger the file size is. It might affect Internet transmitting speed if the file gets too large.

Video Frame Rate: The video refreshing rate per second. The max value is affected by the input resolution you choose.

Video Format: H.264, MPEG4, or M-JPEG.

RTSP Path: Set the RTSP output connecting route. You can use the RTSP address displaying beside the column to access this IP camera.

© Copyright 2014 TRENDnet. All Rights Reserved.

27

Image 28

Contents TRENDnet User’s Guide Contents Package Contents FeaturesProduct Hardware Features Product OverviewApplication Diagram Camera ConnectorsHardware Installation InstallationShield Installation Camera Installation Bracket InstallationLED Indicator WaterproofingTV-IP302PI TV-IP302PI Configuration Viewing Camera Basic Function     Configuring the Camera Setting System System System Information OSD SettingSystem System Information Server Information System System Information Time Setting System User Management ∙ Direct Video Stream Authentication∙ Enable Password Protection ∙ Firmware Upgrade∙ Configuration System ToolsNetwork Network Setting IP Address Setting Network Network Setting IPv6 SettingNetwork Network Setting Port Setting Network Network Setting Web AuthenticationNetwork Network Setting UPnP ∙ UPnP Network Network Setting Rtsp Setting ∙ Rtsp Server∙ Rtsp Authentication ∙ UPnP Port ForwardingNetwork Network Setting Onvif Network Network Setting Bonjour∙ Security ∙ Rtsp KeepaliveNetwork Advanced Https Network Advanced Snmp ∙ SNMPv3 ∙ SNMPv1/SNMPv2 Trap Network Advanced IP Address Filter Network Advanced QoS/DSCPNetwork Advanced Ieee Network PPPoE & Ddns ∙ PPPoEDdns Status ∙ Mail Setting Network Event Server∙ FTP Setting ∙ Samba SettingAudio/Video Setting Image Setting TRENDnet User’s Guide Audio/Video Setting Video Setting ∙ Basic Mode of Streaming 1 and Streaming∙ 3GPP Streaming mode ∙ Advanced Mode of Streaming 1 and StreamingAudio/Video Setting Audio Setting Event Configuration Event Configuration Motion DetectionEvent Configuration Motion Detection Record Time Setting Event Configuration Motion Detection Record FileEvent Configuration Motion Detection Network IP Check Event Configuration Schedule ∙ On/Off Switch mode Gpio Setting Event Configuration Gpio Setting Input SettingOutput Test Factory Default ∙ Time Switch modeHow to Access the IP camera via IP Installer How to setup/access the camera behind a Router Configure Ddns on your CameraConfigure Ddns on your router Protocol Select TCPCamera login page will appear Video Features Technical SpecificationsHardware Management Interface Camera SoftwareWindows Vista TroubleshootingWindows XP Forgot my password. What should I do? Limited Warranty Limited Warranty