TRENDnet Outdoor PoE Megapixel Day/Night Internet Camera manual TV-IP302PI

Page 7

TRENDnet User’s Guide

3.Plug in and connect the power adapter to the camera. If you are using the PoE to supply power to the camera, please skip to the next step. Click Next when you are done.

4.Connect a network cable to the camera’s network port and then to your router.

If you are using PoE, please ensure the cable is connected to a PoE switch or PoE injector.

TV-IP302PI

5.Wait while camera is searching.

6.The founded cameras will show on the screen. The camera already selected by default if you have only one camera installed. If you have more than one camera in the same Network, you will need to identify the camera by the MAC ID. Click Next.

© Copyright 2014 TRENDnet. All Rights Reserved.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents TRENDnet User’s Guide Contents Product Overview Package ContentsFeatures Product Hardware FeaturesCamera Connectors Application DiagramHardware Installation InstallationShield Installation Waterproofing Camera InstallationBracket Installation LED IndicatorTV-IP302PI TV-IP302PI Viewing Camera Basic Function Configuration     Configuring the Camera Setting System System System Information OSD SettingSystem System Information Server Information System User Management ∙ Direct Video Stream Authentication System System Information Time SettingSystem Tools ∙ Enable Password Protection∙ Firmware Upgrade ∙ ConfigurationNetwork Network Setting Web Authentication Network Network Setting IP Address SettingNetwork Network Setting IPv6 Setting Network Network Setting Port Setting∙ UPnP Port Forwarding Network Network Setting UPnP ∙ UPnPNetwork Network Setting Rtsp Setting ∙ Rtsp Server ∙ Rtsp Authentication∙ Rtsp Keepalive Network Network Setting OnvifNetwork Network Setting Bonjour ∙ SecurityNetwork Advanced Https Network Advanced Snmp ∙ SNMPv3 ∙ SNMPv1/SNMPv2 Trap Network Advanced QoS/DSCP Network Advanced IP Address Filter∙ PPPoE Network Advanced Ieee Network PPPoE & DdnsDdns Status Network Event Server ∙ Mail Setting∙ Samba Setting ∙ FTP SettingAudio/Video Setting Image Setting TRENDnet User’s Guide ∙ Basic Mode of Streaming 1 and Streaming Audio/Video Setting Video Setting∙ 3GPP Streaming mode ∙ Advanced Mode of Streaming 1 and StreamingAudio/Video Setting Audio Setting Event Configuration Motion Detection Event ConfigurationEvent Configuration Motion Detection Record Time Setting Event Configuration Motion Detection Record FileEvent Configuration Motion Detection Network IP Check Event Configuration Schedule ∙ On/Off Switch mode Gpio Setting Event Configuration Gpio Setting Input SettingOutput Test ∙ Time Switch mode Factory DefaultHow to Access the IP camera via IP Installer Configure Ddns on your Camera How to setup/access the camera behind a RouterProtocol Select TCP Configure Ddns on your routerCamera login page will appear Video Features Technical SpecificationsHardware Camera Software Management InterfaceWindows Vista TroubleshootingWindows XP Forgot my password. What should I do? Limited Warranty Limited Warranty
Top Page Image Contents