TRENDnet TV-IP302PI manual ∙ Enable Password Protection, System Tools, ∙ Firmware Upgrade

Page 14

TRENDnet User’s Guide

∙Enable Password Protection:

Yes: User needs to enter user name and password to stream the camera.

No: User can stream the camera without entering the username and password.

∙Add user: Enter the username and password to add guest users to access the camera. The guest user can only view the live view video and is not allowed to do any configuration.

∙User List: List all users that were added into the camera. Click “Edit” to modify the user information. Click “Remove” to remove the users from the list.

∙

System >> Tools

TV-IP302PI

∙Firmware Upgrade:

To update the firmware, click “Browse” to select the firmware, then click

“Upgrade” to proceed. Please do not disconnect power or Network cable during firmware upgrading.

∙System Reboot: Click Reboot to reboot the IP camera.

∙Factory Reset: Click Reset to reset all the settings back to factory default value

∙Configuration:

Backup: Click Backup to save the configuration to your computer.

Restore: Click "Browse..." to select the configure file from your computer then click Restore to restore all setting

NETWORK

© Copyright 2014 TRENDnet. All Rights Reserved.

13

Image 14

Contents TRENDnet User’s Guide Contents Product Hardware Features Package ContentsFeatures Product OverviewApplication Diagram Camera ConnectorsShield Installation InstallationHardware Installation LED Indicator Camera InstallationBracket Installation WaterproofingTV-IP302PI TV-IP302PI Configuration Viewing Camera Basic Function     Configuring the Camera Setting System System Information Server Information System System Information OSD SettingSystem System System Information Time Setting System User Management ∙ Direct Video Stream Authentication∙ Configuration ∙ Enable Password Protection∙ Firmware Upgrade System ToolsNetwork Network Setting Port Setting Network Network Setting IP Address SettingNetwork Network Setting IPv6 Setting Network Network Setting Web Authentication∙ Rtsp Authentication Network Network Setting UPnP ∙ UPnPNetwork Network Setting Rtsp Setting ∙ Rtsp Server ∙ UPnP Port Forwarding∙ Security Network Network Setting OnvifNetwork Network Setting Bonjour ∙ Rtsp KeepaliveNetwork Advanced Https Network Advanced Snmp ∙ SNMPv3 ∙ SNMPv1/SNMPv2 Trap Network Advanced IP Address Filter Network Advanced QoS/DSCPNetwork Advanced Ieee Network PPPoE & Ddns ∙ PPPoEDdns Status ∙ Mail Setting Network Event Server∙ FTP Setting ∙ Samba SettingAudio/Video Setting Image Setting TRENDnet User’s Guide Audio/Video Setting Video Setting ∙ Basic Mode of Streaming 1 and StreamingAudio/Video Setting Audio Setting ∙ Advanced Mode of Streaming 1 and Streaming∙ 3GPP Streaming mode Event Configuration Event Configuration Motion DetectionEvent Configuration Motion Detection Network IP Check Event Configuration Motion Detection Record FileEvent Configuration Motion Detection Record Time Setting Event Configuration Schedule Output Test Gpio Setting Event Configuration Gpio Setting Input Setting∙ On/Off Switch mode Factory Default ∙ Time Switch modeHow to Access the IP camera via IP Installer How to setup/access the camera behind a Router Configure Ddns on your CameraConfigure Ddns on your router Protocol Select TCPCamera login page will appear Hardware Technical SpecificationsVideo Features Management Interface Camera SoftwareWindows XP TroubleshootingWindows Vista Forgot my password. What should I do? Limited Warranty Limited Warranty