Bosch Appliances MIC412 operation manual Connectivity

Page 52

MIC412TI and MIC412TF Camera Installation and Operation Manual				EN 52
CONNECTIVITY		Dimensions (W x H x D)		267 x 445 x 200 mm, including 4-in. PCD
				base
Video	Single coaxial via composite cable			(10.51 x 17.52 x 7.87 ft)
Telemetry	Twisted pair. Simplex, half and full duplex	Weight		9.5 kg (20.94 lb), including 4-in. PCD base
	operation via composite cable
Power	Via composite cable	ENVIRONMENTAL
ALARMS		Operational temperature		-40°C to +50°C (-40°F to +122°F)
Alarm inputs	1 x tamper input (additional inputs possible	Weather proofing		IP68 (1 m submission for 24 hrs)
Alarm inputs	1 x tamper input (additional inputs possible
	with optional alarm card in PSU)	ELECTRICAL
Alarm communication	Tamper switch (ground connection)	Input voltage (dual voltage)		18 VAC, ±10%, 50/60 Hz
		Input voltage (dual voltage)		18 VAC, ±10%, 50/60 Hz
		Input current		Camera: 2 A
				Heater: 1 A
MECHANICAL		AVAILABLE OPTIONS
Drive unit	Brushless Integral pan/tilt motor drive	Configuration		Upright mount or inverted mount options
Pan angle	360° continuous rotation	Camera module (optical)		36 x camera module
Pan speed	Up to 72° per second (variable)	Camera colour system		NTSC or PAL
Tilt angle	260°	Installed protocol		Choose from current protocol list
Tilt speed	0.2° to 90° per second variable	Telemetry control card		Supplied as standard
Speed control	Closed loop electronics	Window wiper		Supplied as standard
Preset accuracy	±30° (typical)	Alarm card		Optional (In PSU), factory fit
Proportional P/T to Zoom	Yes	Washer		Optional (washer bracket only)
PHYSICAL		ACCESSORIES
Construction material	Machined aluminium	Power supply		Choice of 24 VAC, 115 VAC, or 230 VAC
Viewing window glass	Tempered flat glass (optical) & germanium	Mounting hardware		Compatible with all MIC series bracketry
	covering (thermal)	Cabling		Optional, Choose from 2 m, 10 m, 20 m or
Standard colours	Black (RAL9005), Grey (RAL7001) or			25 m versions
	White (RAL9003)
Standard finish	Alocrom 1200 surface treatment with
	powder coat paint
Window Wiper	Standard, long-life silicon

Bosch Security Systems

Issue 8

Image 52

Contents MIC412 Dual Optical / Thermal PTZ Camera MIC 412 Dual Optical / Thermal PTZ Camera Power Supply Installation and Camera Setup… Safety Precautions Important Safety Instructions Glossary of Terms Glossary of AppendicesIntroduction MIC 412 Power Supply Unit Versions and Options MIC412 Camera VersionsFeatures Packaging ContentsMIC 412 Options WiperInstallation Environment Bosch Security Systems Issue Associated Equipment and Typical Installations Key to MIC-PMB drawingHardware Installation Installation InstructionsLightning Protection Earthing of the MIC 412 cameraElectrical Connections MIC 412TI and MIC 412TF Power Supply Units Power Supply Layout and ConnectionsMIC-24PSU-UL, MIC-115PSU-UL, and MIC-240PSU-UL PCB Earth LinkHD3 Table D -Telemetry Connections to HD3, HD4 and HD5Terminal Box Connector Terminal Box ID Marking Fuse Fuse functionRating for 240v Primary Rating for 115v PrimaryCommissioning the MIC 412 with heater option fitted Fitting the optional Sunshield Connecting the MIC 412 to the PC Connecting the Greenwich AdaptorTable G Connecting the Greenwich Adaptor Connecting the KK systems K2-ADE RS232 to RS485/422 AdaptorConnecting the MIC-USB485CVTR, USB to RS485 Converter Table I Camera Interface Control Settings DIP SwitchCamset Tabs Wire RS485 Wire RS422 MIC-USB485CVTR and Universal Camset Software Installation HD4 or HD5Boot Messages MIC SettingsCommissioning the MIC412 through Universal Camset Standard ControlsCamset Settings Manual Control Pan, Tilt and Zoom Controls Preset Positions Iris ControlsFocus Controls AuxiliariesTour Controls Preset ToursPattern Tours MIC Setups Soft Stops and Non Dwell ZonesNon-Dwell Zone ClearGeneral Settings Auto Home Controls Other controlsDefault Settings Multi Alarm Settings Learn Alarm PositionsFrame Integration Settings Relay State, Activation and Re-armPrivacy and Captions Privacy ControlsPrivacy Calibration Captions FFC Mode and Settings ThermalShutter Open/Close Gain and Auto Gain ModesAdvanced Settings Temperature and HumidityTimers Clear All StatisticsEeprom Copier OnlyDownload Eeprom To File Upload Eeprom From FileManual and Preset / Goto Controls POT TestMenu Controls Panasonic Only Matrix ControlsPot Test Controls Visible TracesPot Test Results CommsMouse Point Values Send Direct Command Communications Testing AlarmsMIC Comms Cam CommsGet Preset from MIC Send Preset to MICSony Set SonySet ControlsExecute this Preset Load Table from File to MICSave Table from MIC to File Clear TableTable K Sonyset Commands Value MIC Programmer Bosch Security Systems Issue Help MIC412 Preset Codes for the Thermal Imager Learning a presetGo to a preset Bosch Protocol Aux Number Aux On Function Aux Off FunctionMIC412TI and TF Dual Optical/Thermal PTZ Camera 36x optical zoom moduleConnectivity Dimension Drawings Appendix a Sonyset Camera CommandsMIC 412 models Upright 90 Dimension Drawings Appendix B Protocol Preset Codes PelcoWashwipeonpreset Washwipeoffpreset Special Setup Presets VisionAmerican Dynamics Special Setup Presets Kalatel Molynx Autoironpreset Autoiroffpreset Multialarmonpreset Panasonic Bosch Forward Vision Intermitantwipeonpreset Intermitantwipeoffpreset VCL Vicon Rightpreset Softlimitbottom Multialarmpreset Contact Americas Europe, Middle East, AfricaAsia-Pacific Bosch Security Systems IncBosch Security Systems, Inc