Optiview TRKPTZ-18NX, TRKPTZ -26NX user manual Menu Configuration

Page 14

Auto Zooming Tracking Dome Camera User Manual

dome will calls these parameters saved in memoriy and adjust Pan/Tilt/Zoom of the camera to that position.

Presets 1	Function		Presets 2

80	Auto tracking		37
80			37

82	Auto switch sequentially among	preset	19
82	positions		19
	positions

83	Clear all presets positions		20

95	Select main programming menu		28

97	Random scanning		30

98	Frame scanning		31

99	Start auto scanning		32

Extended Presets

Note: For others dynamics controllers with only 64 or 40 presets. On the menu of PRESETS NUMBER, set it as 64 or 40. Then you can use presets listed in „Presets 2‟ in stead.

(5)Zoom: You can press IN or OUT key continuously or revolve the joystick to get desired zooming times.

(6)Focus: press FAR or NEAR key.

(7)Iris: Press OPEN or CLOSE key.

Section 3 Menu Configuration

You need to install the dome system before using this

13

Image 14

Contents Auto Zooming Tracking Dome Cameras Contents Dome Label Other Functions Production Introducing CharacterFunction Description Page Page Random Scan Alarms Alarms input Specification Comparison Chart Auto trackingAGC 18X 22X 23X Normal Operation Menu Configuration PTOL：PELCO-D Main Menu Select LanguageSystem Information System InformationDisplay Setup 3.4.1 Display Setup Label Position Dome Settings Camera SettingsProgram AE Mode Backlight Compensation BLCAE Mode LOW Light ModeAGC Level LOW Light LimitIris Level Bright LevelShutter Other MenuIR CUT Filter 8A Other Menu Auto IrisAuto Sharpness Auto White BalanceMotion Setting Auto FilpPark Action Proportional PANPark Time Clear Scan Stops Scan SpeedSET Scan Stops SET Manual LimitSET Azimuth Zero Power UpPower UP Action Clear Azimuth ZeroPresets Setting Select preset number Edit preset labelClear a preset Patterns SettingEdit preset scene Programe PatternZone Setting Clear PatternTo program a zone To edit a zone labelClear Zones Clears SettingTo clear a zone Clear Presets Presets NumberDome Settings 2 Menu Restore Factory DefaultsReset Delaysecs AlarmsAlarm Number SequencesecsSelect alarm priority Alarms SettingSelect alarm number Set alarm action Set auxiliary to activate Aux SettingSet alarm contact Password Setting Enable Password Windows Blanking StyleSet Windows Blanking ParametersEdit Windows Location Operation27 Edit Windows Pan the joystick to adjust the zoom times Edit Windows ZoomTemperature SET Heater SettingHeater Mode Heater DisplayCruise Setting Tracking Setting Page Tracking Boundary Dome Label Reset CameraReboot System Other Functions