Optiview TRKPTZ -26NX, TRKPTZ-18NX user manual Presets Setting

Page 31

Auto Zooming Tracking Dome Camera User Manual

This setting defines a specific activity (scan, preset, pattern) to be performed after the dome is powered up.

Following settings are available: NONE (default): No action.

AUTO SCAN: Dome starts auto scan operation.

RANDOM SCAN: Dome starts random scan operation.

FRAME SCAN: Dome starts frame scan operation.

PRESET 1: Dome goes to preset 1.

PRESET 8: Dome goes to preset 8. PATTERN 1:Dome runs pattern 1. PATTERN 2:Dome runs pattern 2. PATTERN 3:Dome runs pattern 3. PATTERN 4:Dome runs pattern 4.

3.5.5 Presets Setting

Move joystick to select <PRESETS>, press Open to enter the presets menu shown as Fig3.11.

PRESETS

PRESET NUMBER1 …PRESET NOT DEFINEO…

<EDIT PRESET LABEL >

<EDIT PRESET SCAENE >

<CLEAR PRESET > BACK

EXIT

Figure 3.11 PRESET

The dome camera has 64 programmable preset positions.

Follow below steps to program a preset.

30

Image 31

Contents Auto Zooming Tracking Dome Cameras Contents Dome Label Other Functions Character Production IntroducingFunction Description Page Page Random Scan Alarms Alarms input Auto tracking Specification Comparison ChartAGC 18X 22X 23X Normal Operation Menu Configuration PTOL：PELCO-D Select Language Main MenuSystem Information System InformationDisplay Setup 3.4.1 Display Setup Label Position Camera Settings Dome SettingsBacklight Compensation BLC Program AE ModeLOW Light Mode AE ModeBright Level LOW Light LimitIris Level AGC LevelIR CUT Filter Other MenuShutter Auto Iris 8A Other MenuAuto White Balance Auto SharpnessAuto Filp Motion SettingPark Time Proportional PANPark Action SET Manual Limit Scan SpeedSET Scan Stops Clear Scan StopsClear Azimuth Zero Power UpPower UP Action SET Azimuth ZeroPresets Setting Edit preset label Select preset numberPrograme Pattern Patterns SettingEdit preset scene Clear a presetClear Pattern Zone SettingTo edit a zone label To program a zoneTo clear a zone Clears SettingClear Zones Restore Factory Defaults Presets NumberDome Settings 2 Menu Clear PresetsSequencesecs AlarmsAlarm Number Reset DelaysecsSelect alarm number Alarms SettingSelect alarm priority Set alarm action Set alarm contact Aux SettingSet auxiliary to activate Password Setting Enable Password Style Windows BlankingBlanking Parameters Set WindowsOperation Edit Windows LocationEdit Windows Zoom 27 Edit Windows Pan the joystick to adjust the zoom timesHeater Display Heater SettingHeater Mode Temperature SETCruise Setting Tracking Setting Page Tracking Boundary Other Functions Reset CameraReboot System Dome Label