Auto Zooming Tracking Dome Camera User Manual
3.7 Dome Label
From the menu shown in Fig3.1, move the cursor to <DOME LABEL>, press Open to enter the following menu (Figure .32)
DOME LABLE <EDIT DOME LABEL> <CLEAR DOME LABEL> BACK
EXIT
Figure 3.32 DOME LABLE
<EDIT DOME LABEL>: To edit the dome description and information. Please refer to 3.5.4 Edit Preset Label”.
<CLEAR DOME LABLE>: Clear current dome label. Press Open to enter the menu and then operate with instructions.
3.8 Other Functions
RESET CAMERA:
If the camera does not operate or if you close camera‟s control, cycle camera power. Cycling camera power resets the camera but does not change any saved camera settings.
REBOOT SYSTEM:
Reboot the system if it does not operate or if there is no control. Rebooting the system will cycle dome and camera power without changing programmed dome settings. Ω
52