Optiview TRKPTZ -26NX, TRKPTZ-18NX user manual Ptol：Pelco-D

Page 15

Auto Zooming Tracking Dome Camera User Manual

manual. Please refer to the installation packet supplied with the back box for installation instructions.

After installed properly, power up the camera. It will start a configuration sequence. After the configuration is done, the monitor will display as below.

PTOL：PELCO-D

COMM：2400,N,8,1

ADDR：0

This information will remain on the monitor until dome operation begins.

Please refer to the following pages for more about how to operate and program the camera.

Access main menu (preset 95): Please refer to the Accessing Main Menu (Preset 95) section.

(1)Move joystick to position the cursor beside menu selection.

(2)Move the joystick up or down to submenu/cursor selections.

(3)Press iris Open to confirm selection.

(4)Press iris Close to cancel selection.

(5)Below instructions are based on using control keyboard as control device.

14

Image 15

Contents Auto Zooming Tracking Dome Cameras Contents Dome Label Other Functions Character Production IntroducingFunction Description Page Page Random Scan Alarms Alarms input Auto tracking Specification Comparison ChartAGC 18X 22X 23X Normal Operation Menu Configuration PTOL：PELCO-D Select Language Main MenuSystem Information System InformationDisplay Setup 3.4.1 Display Setup Label Position Camera Settings Dome SettingsBacklight Compensation BLC Program AE ModeLOW Light Mode AE ModeBright Level LOW Light LimitIris Level AGC LevelOther Menu IR CUT FilterShutter Auto Iris 8A Other MenuAuto White Balance Auto SharpnessAuto Filp Motion SettingProportional PAN Park TimePark Action SET Manual Limit Scan SpeedSET Scan Stops Clear Scan StopsClear Azimuth Zero Power UpPower UP Action SET Azimuth ZeroPresets Setting Edit preset label Select preset numberPrograme Pattern Patterns SettingEdit preset scene Clear a presetClear Pattern Zone SettingTo edit a zone label To program a zoneClears Setting To clear a zoneClear Zones Restore Factory Defaults Presets NumberDome Settings 2 Menu Clear PresetsSequencesecs AlarmsAlarm Number Reset DelaysecsAlarms Setting Select alarm numberSelect alarm priority Set alarm action Aux Setting Set alarm contactSet auxiliary to activate Password Setting Enable Password Style Windows BlankingBlanking Parameters Set WindowsOperation Edit Windows LocationEdit Windows Zoom 27 Edit Windows Pan the joystick to adjust the zoom timesHeater Display Heater SettingHeater Mode Temperature SETCruise Setting Tracking Setting Page Tracking Boundary Other Functions Reset CameraReboot System Dome Label