Optiview TRKPTZ -26NX, TRKPTZ-18NX Alarms Setting, Select alarm number, Select alarm priority

Page 39

Auto Zooming Tracking Dome Camera User Manual

This is the length of time the dome considers the alarm to be active after it has physically cleared.

3.6.2 Alarms Setting

Move joystick to select <ALARM NUMBER>, then press Open to enter the alarm number menu shown as Fig 3.19.

ALARM NUMBER	1
ALARM PRIORITY	LOW
ALARM ACTION	NONE
ACTIVATE AUX	OPEN
ALARM CONTACT	OPEN
BACK
EXIT

Figure 3.19 ALARM SETTINGS

Follow below steps to program alarm settings.

Select alarm number:

(1)a. Move joystick to position the cursor the cursor beside

ALARM NUMBER.

b. Press iris Open.

c. Move the joystick up or down to view selections. Press iris Open to confirm selection.

(2)Move the joystick to position the cursor beside Alarm Settings. Press iris Open.

Select alarm priority:

(1) Move joystick to position the cursor beside Alarm Priority.

38

Image 39

Contents Auto Zooming Tracking Dome Cameras Contents Dome Label Other Functions Character Production IntroducingFunction Description Page Page Random Scan Alarms Alarms input Auto tracking Specification Comparison ChartAGC 18X 22X 23X Normal Operation Menu Configuration PTOL：PELCO-D Select Language Main MenuSystem Information System InformationDisplay Setup 3.4.1 Display Setup Label Position Camera Settings Dome SettingsBacklight Compensation BLC Program AE ModeLOW Light Mode AE ModeBright Level LOW Light LimitIris Level AGC LevelOther Menu IR CUT FilterShutter Auto Iris 8A Other MenuAuto White Balance Auto SharpnessAuto Filp Motion SettingProportional PAN Park TimePark Action SET Manual Limit Scan SpeedSET Scan Stops Clear Scan StopsClear Azimuth Zero Power UpPower UP Action SET Azimuth ZeroPresets Setting Edit preset label Select preset numberPrograme Pattern Patterns SettingEdit preset scene Clear a presetClear Pattern Zone SettingTo edit a zone label To program a zoneClears Setting To clear a zoneClear Zones Restore Factory Defaults Presets NumberDome Settings 2 Menu Clear PresetsSequencesecs AlarmsAlarm Number Reset DelaysecsAlarms Setting Select alarm numberSelect alarm priority Set alarm action Aux Setting Set alarm contactSet auxiliary to activate Password Setting Enable Password Style Windows BlankingBlanking Parameters Set WindowsOperation Edit Windows LocationEdit Windows Zoom 27 Edit Windows Pan the joystick to adjust the zoom timesHeater Display Heater SettingHeater Mode Temperature SETCruise Setting Tracking Setting Page Tracking Boundary Other Functions Reset CameraReboot System Dome Label