Optiview TRKPTZ -26NX, TRKPTZ-18NX user manual Program AE Mode, Backlight Compensation BLC

Page 21

Auto Zooming Tracking Dome Camera User Manual

CAMERA
ZOME LIMIT	X46
BACKLIGHT COMP	ON/OFF
<PROGRAM AE MODE>
<OTHERS>
BACK
EXIT

Figure 3.6 CAMERA

ZOOM LIMIT:

Zoom limit enables you to define a limitation on zooming times.

BACKLIGHT COMPENSATION (BLC):

If a bright backlight presents, the subjects in the picture may appear dark or as a silhouette. Backlight compensation enhances objects in the center of the picture. The dome uses the center of the picture to adjust the iris. If there is a bright light source outside this area, it will change to white. The camera will adjust the iris so that the object in the sensitive area is properly exposed.

There are two backlight compensation settings: ON: Backlight compensation is activated.

OFF (default): Backlight compensation is not activated.

3.5.2.1 Program AE Mode

Move joystick to select < PROGRAM AE CORTROL >, press Open to enter the PROGRAM AE CORTROL menu shown as Fig3.7

20

Image 21

Contents Auto Zooming Tracking Dome Cameras Contents Dome Label Other Functions Character Production IntroducingFunction Description Page Page Random Scan Alarms Alarms input Auto tracking Specification Comparison ChartAGC 18X 22X 23X Normal Operation Menu Configuration PTOL：PELCO-D Select Language Main MenuSystem Information System InformationDisplay Setup 3.4.1 Display Setup Label Position Camera Settings Dome SettingsBacklight Compensation BLC Program AE ModeLOW Light Mode AE ModeIris Level LOW Light LimitAGC Level Bright LevelOther Menu IR CUT FilterShutter Auto Iris 8A Other MenuAuto White Balance Auto SharpnessAuto Filp Motion SettingProportional PAN Park TimePark Action SET Scan Stops Scan SpeedClear Scan Stops SET Manual LimitPower UP Action Power UpSET Azimuth Zero Clear Azimuth ZeroPresets Setting Edit preset label Select preset numberEdit preset scene Patterns SettingClear a preset Programe PatternClear Pattern Zone SettingTo edit a zone label To program a zoneClears Setting To clear a zoneClear Zones Dome Settings 2 Menu Presets NumberClear Presets Restore Factory DefaultsAlarm Number AlarmsReset Delaysecs SequencesecsAlarms Setting Select alarm numberSelect alarm priority Set alarm action Aux Setting Set alarm contactSet auxiliary to activate Password Setting Enable Password Style Windows BlankingBlanking Parameters Set WindowsOperation Edit Windows LocationEdit Windows Zoom 27 Edit Windows Pan the joystick to adjust the zoom timesHeater Mode Heater SettingTemperature SET Heater DisplayCruise Setting Tracking Setting Page Tracking Boundary Reboot System Reset CameraDome Label Other Functions