Optiview TRKPTZ -26NX, TRKPTZ-18NX user manual Label Position

Page 19

Auto Zooming Tracking Dome Camera User Manual

ratio label is displayed when zoom is activated. Azimuth/elevation and direction labels are displayed when pan/tilt is activated. The dome label is displayed when the dome label is activated.

The following settings are available foe each label: OFF: The label is not displayed when activated. ON: The label shows when activated.

3.4.2 Label Position

Labels can be placed anywhere on the monitor. This feature enables you to customize the place of labels on monitor screen.

ZONE CAMERA PRESET

SAVE

RESET

AZIMUTHZOOM

Figure 3.4 Label Position

To set a label position:

(1)Move joystick to position the cursor beside a label.

(2)Press iris Open.

(3)Move joystick to move the label up, down, left, or right.

(4)Press iris Open.

(5)Repeat steps 1 through 4 to position other labels.

(6)Move the cursor to Save and press iris Open to save settings and return to display setup menu.

18

Image 19

Contents Auto Zooming Tracking Dome Cameras Contents Dome Label Other Functions Character Production IntroducingFunction Description Page Page Random Scan Alarms Alarms input Auto tracking Specification Comparison ChartAGC 18X 22X 23X Normal Operation Menu Configuration PTOL：PELCO-D Select Language Main MenuSystem Information System InformationDisplay Setup 3.4.1 Display Setup Label Position Camera Settings Dome SettingsBacklight Compensation BLC Program AE ModeLOW Light Mode AE ModeBright Level LOW Light LimitIris Level AGC LevelIR CUT Filter Other MenuShutter Auto Iris 8A Other MenuAuto White Balance Auto SharpnessAuto Filp Motion SettingPark Time Proportional PANPark Action SET Manual Limit Scan SpeedSET Scan Stops Clear Scan StopsClear Azimuth Zero Power UpPower UP Action SET Azimuth ZeroPresets Setting Edit preset label Select preset numberPrograme Pattern Patterns SettingEdit preset scene Clear a presetClear Pattern Zone SettingTo edit a zone label To program a zoneTo clear a zone Clears SettingClear Zones Restore Factory Defaults Presets NumberDome Settings 2 Menu Clear PresetsSequencesecs AlarmsAlarm Number Reset DelaysecsSelect alarm number Alarms SettingSelect alarm priority Set alarm action Set alarm contact Aux SettingSet auxiliary to activate Password Setting Enable Password Style Windows BlankingBlanking Parameters Set WindowsOperation Edit Windows LocationEdit Windows Zoom 27 Edit Windows Pan the joystick to adjust the zoom timesHeater Display Heater SettingHeater Mode Temperature SETCruise Setting Tracking Setting Page Tracking Boundary Other Functions Reset CameraReboot System Dome Label