Optiview TRKPTZ-18NX user manual Power Up, SET Azimuth Zero, Clear Azimuth Zero, Power UP Action

Page 30

Auto Zooming Tracking Dome Camera User Manual

(3) Follow the directions displayed on the monitor.

SET AZIMUTH ZERO:

Azimuth is the pan angle from 0°to 359°.Azimuth zero is the pan position you specify to be the 0°point. Azimuth zero is normally set to magnetic north. Once set, azimuth and compass readings are based on the set Azimuth Zero point.

To program azimuth zero:

(1)Move joystick to position the cursor beside set azimuth

zero.

(2)Press iris Open.

(3)Follow the directions displayed on the monitor.

CLEAR AZIMUTH ZERO:

(1)Move joystick to position the cursor beside CLEAR AZIMUTH ZERO.

(2)Press iris Open

(3)Follow the directions displayed on the monitor.

3.5.4Power Up

Move joystick to select <power up>, press Open to enter the power up menu shown as Fig3.10.

POWER UP

POWER UP ACTION NONE

BACK

EXIT

Figure 3.10 POWER UP

POWER UP ACTION:

29

Image 30

Contents Auto Zooming Tracking Dome Cameras Contents Dome Label Other Functions Production Introducing CharacterFunction Description Page Page Random Scan Alarms Alarms input Specification Comparison Chart Auto trackingAGC 18X 22X 23X Normal Operation Menu Configuration PTOL：PELCO-D Main Menu Select LanguageSystem Information System InformationDisplay Setup 3.4.1 Display Setup Label Position Dome Settings Camera SettingsProgram AE Mode Backlight Compensation BLCAE Mode LOW Light ModeAGC Level LOW Light LimitIris Level Bright LevelOther Menu IR CUT FilterShutter 8A Other Menu Auto IrisAuto Sharpness Auto White BalanceMotion Setting Auto FilpProportional PAN Park TimePark Action Clear Scan Stops Scan SpeedSET Scan Stops SET Manual LimitSET Azimuth Zero Power UpPower UP Action Clear Azimuth ZeroPresets Setting Select preset number Edit preset labelClear a preset Patterns SettingEdit preset scene Programe PatternZone Setting Clear PatternTo program a zone To edit a zone labelClears Setting To clear a zoneClear Zones Clear Presets Presets NumberDome Settings 2 Menu Restore Factory DefaultsReset Delaysecs AlarmsAlarm Number SequencesecsAlarms Setting Select alarm numberSelect alarm priority Set alarm action Aux Setting Set alarm contactSet auxiliary to activate Password Setting Enable Password Windows Blanking StyleSet Windows Blanking ParametersEdit Windows Location Operation27 Edit Windows Pan the joystick to adjust the zoom times Edit Windows ZoomTemperature SET Heater SettingHeater Mode Heater DisplayCruise Setting Tracking Setting Page Tracking Boundary Dome Label Reset CameraReboot System Other Functions