Optiview TRKPTZ-18NX, TRKPTZ -26NX user manual Other Menu, IR CUT Filter, Shutter

Page 24

Auto Zooming Tracking Dome Camera User Manual

AU+DSS+IR1, AU+DSS+IR2, AU+DSS+IR3, SHUTTER PR, IRIS PRIO, and AGC PRIORI.

IR CUT FILTER

Settings include: IN and OUT.

LOW LIGHT LIMIT

Settings include: 1/1.5, 1/3, 1/6, 1/12, 1/25, 1/50.

SHUTTER

Settings include: 1/30000, 1/10000, 1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/150, 1/100, 1/50, 1/25, 1/12, 1/6, 1/3, 1/1.5.

IRIS LEVEL

Iris level is the lens function that automatically opens and closes the iris in response to changing light conditions. The default setting is F1.6.

Settings include: F1.6, F2.2, F3.2, F4.4, F6.4, F8.8, F12, F17, F24, F34.

AGC LEVEL

AGC(Automatic Gain Control) automatically adjusts the amount of video amplification to maintain a Full 1-volt peak-to-peak video signal output. The default setting is 0 dB.

Settings include: 0dB, 6dB, 12dB, 18dB, 24dB, and 30dB

3.5.2.2 Other Menu

Move joystick to select < others >, press Open to enter the others menu shown as Fig3.8.

23

Image 24

Contents Auto Zooming Tracking Dome Cameras Contents Dome Label Other Functions Production Introducing CharacterFunction Description Page Page Random Scan Alarms Alarms input Specification Comparison Chart Auto trackingAGC 18X 22X 23X Normal Operation Menu Configuration PTOL：PELCO-D Main Menu Select LanguageSystem Information System InformationDisplay Setup 3.4.1 Display Setup Label Position Dome Settings Camera SettingsProgram AE Mode Backlight Compensation BLCAE Mode LOW Light ModeLOW Light Limit Iris LevelAGC Level Bright LevelOther Menu IR CUT FilterShutter 8A Other Menu Auto IrisAuto Sharpness Auto White BalanceMotion Setting Auto FilpProportional PAN Park TimePark Action Scan Speed SET Scan StopsClear Scan Stops SET Manual LimitPower Up Power UP ActionSET Azimuth Zero Clear Azimuth ZeroPresets Setting Select preset number Edit preset labelPatterns Setting Edit preset sceneClear a preset Programe PatternZone Setting Clear PatternTo program a zone To edit a zone labelClears Setting To clear a zoneClear Zones Presets Number Dome Settings 2 MenuClear Presets Restore Factory DefaultsAlarms Alarm NumberReset Delaysecs SequencesecsAlarms Setting Select alarm numberSelect alarm priority Set alarm action Aux Setting Set alarm contactSet auxiliary to activate Password Setting Enable Password Windows Blanking StyleSet Windows Blanking ParametersEdit Windows Location Operation27 Edit Windows Pan the joystick to adjust the zoom times Edit Windows ZoomHeater Setting Heater ModeTemperature SET Heater DisplayCruise Setting Tracking Setting Page Tracking Boundary Reset Camera Reboot SystemDome Label Other Functions