Auto Zooming Tracking Dome Camera User Manual
PANTTERN 3: Dome runs pattern3.
PANTTERN4: Dome runs pattern4.
SCAN SPEED:
Scan speed is that the dome will pan when in a FRAME SCAN mode. Scan speed is adjustable from 1 to 32 via the programming menu.
SET SCAN STOPS:
Set Scan Stops are programmable stops that limit the pan range of the dome. There must be two limits, a left and a right, to define an area. The dome reverses direction frame scanning when a limit stop is reached.
To set scan stops:
(1)Move joystick to position the cursor beside set scan
stops.
(2)Press iris Open.
(3)Follow the directions displayed on the monitor.
CLEAR SCAN STOPS:
To clear scan stops:
(1)Move joystick to position the cursor beside clear scan
stops.
(2)Press iris Open.
(3)Follow the directions displayed on the monitor.
SET MANUAL LIMIT:
<Set manual limit > is to set the P/T/Z‟s moving range. To set manual limit:
(1)Move joystick to position the cursor beside set manual
limit.
(2)Press iris Open.
28