Optiview TRKPTZ -26NX, TRKPTZ-18NX user manual Motion Setting, Auto Filp

Page 27

Auto Zooming Tracking Dome Camera User Manual

change the value, the color changes on your monitor.

3.5.3 Motion Setting

Move joystick to select <MOTION >, press Open to enter the motion menu shown as Fig3.9.

MOTION
AUTO FLIP	ON/OFF
PROPORTIONAL PAN	ON/OFF
PARK TIME（MINUTES）		0
PARK ACTION		NONE
SCAN SPEED（DEG/S）		1

<SET SCAN>

<MANUAL LIMIT>

<SET AZIMUTH ZERO>

<CLEAR AZIMUTH ZERO> BACK

EXIT

FIGURE 3.9 MOTION MENU

AUTO FILP:

When the dome camera tilts downward and goes just beyond the vertical, the dome camera rotates 180 degrees automatically. Afterwards, the dome camera starts moving upward even you still hold joystick in the down position. Once you let go of the joystick after the dome rotates, joystick control returns to normal operation. The auto-flip feature is useful for following a person who passes directly beneath the dome.

There are two auto flip modes:

ON (default): Auto flip mode enabled.

OFF: Auto flip mode disabled.

26

Image 27

Contents Auto Zooming Tracking Dome Cameras Contents Dome Label Other Functions Character Production IntroducingFunction Description Page Page Random Scan Alarms Alarms input Auto tracking Specification Comparison ChartAGC 18X 22X 23X Normal Operation Menu Configuration PTOL：PELCO-D Select Language Main MenuSystem Information System InformationDisplay Setup 3.4.1 Display Setup Label Position Camera Settings Dome SettingsBacklight Compensation BLC Program AE ModeLOW Light Mode AE ModeBright Level LOW Light LimitIris Level AGC LevelOther Menu IR CUT FilterShutter Auto Iris 8A Other MenuAuto White Balance Auto SharpnessAuto Filp Motion SettingProportional PAN Park TimePark Action SET Manual Limit Scan SpeedSET Scan Stops Clear Scan StopsClear Azimuth Zero Power UpPower UP Action SET Azimuth ZeroPresets Setting Edit preset label Select preset numberPrograme Pattern Patterns SettingEdit preset scene Clear a presetClear Pattern Zone SettingTo edit a zone label To program a zoneClears Setting To clear a zoneClear Zones Restore Factory Defaults Presets NumberDome Settings 2 Menu Clear PresetsSequencesecs AlarmsAlarm Number Reset DelaysecsAlarms Setting Select alarm numberSelect alarm priority Set alarm action Aux Setting Set alarm contactSet auxiliary to activate Password Setting Enable Password Style Windows BlankingBlanking Parameters Set WindowsOperation Edit Windows LocationEdit Windows Zoom 27 Edit Windows Pan the joystick to adjust the zoom timesHeater Display Heater SettingHeater Mode Temperature SETCruise Setting Tracking Setting Page Tracking Boundary Other Functions Reset CameraReboot System Dome Label