Auto Zooming Tracking Dome Camera User Manual
Figure 3.17 DOME SETTINGS
3.6.1 Alarms
Move joystick to select <ALARMS>, then press Open to enter the alarms menu shown as Fig 3.18.
ALARMS
ALARM NUMBER1
SEQUENCE(SECS) 1
<ALARM SETTINGS > <CLEAR SET>
BACK EXIT
Figure 3.18 ALARMS
The dome has seven alarm inputs, which can be programmed as high, medium or low priority. When an alarm is received, the inputted signal to the dome triggers the user–defined action (go to preset, run pattern, etc.) programmed for the alarm.
There are three alarm settings:
ALARM NUMBER:
Use this to select alarms number.
SEQUENCE<SECS>:
This is the time the dome will perform an alarm activity when more than one alarm of the same priority occurs at the same time.
RESET DELAY<SECS>:
37