Optiview TRKPTZ -26NX, TRKPTZ-18NX Aux Setting, Set auxiliary to activate, Set alarm contact

Page 41

Auto Zooming Tracking Dome Camera User Manual

Set auxiliary to activate:

(1)Move joystick to position the cursor beside ACTIVATE

AUX.

(2)Press iris Open.

(3)Move the joystick up or down to view the following available selections.

OFF (default): Not activated.

1:An alarm action will close AUX 1.

2:AN alarm action will close AUX 2.

(4)Press iris Open to confirm selection.

Set alarm contact:

(1)Move joystick to position the cursor beside ALARM CONTACT.

(2)Press iris Open.

(3)Move the joystick up or down to view the following available selections.

OFF (default): close

ON: open.

(4)Press iris Open to confirm selection.

3.6.3Aux Setting

Move joystick to select <AUX>, then press Open to enter the aux menu shown as Fig 3.20.

40

Image 41

Contents Auto Zooming Tracking Dome Cameras Contents Dome Label Other Functions Character Production IntroducingFunction Description Page Page Random Scan Alarms Alarms input Auto tracking Specification Comparison ChartAGC 18X 22X 23X Normal Operation Menu Configuration PTOL：PELCO-D Select Language Main MenuSystem Information System InformationDisplay Setup 3.4.1 Display Setup Label Position Camera Settings Dome SettingsBacklight Compensation BLC Program AE ModeLOW Light Mode AE ModeIris Level LOW Light LimitAGC Level Bright LevelShutter Other MenuIR CUT Filter Auto Iris 8A Other MenuAuto White Balance Auto SharpnessAuto Filp Motion SettingPark Action Proportional PANPark Time SET Scan Stops Scan SpeedClear Scan Stops SET Manual LimitPower UP Action Power UpSET Azimuth Zero Clear Azimuth ZeroPresets Setting Edit preset label Select preset numberEdit preset scene Patterns SettingClear a preset Programe PatternClear Pattern Zone SettingTo edit a zone label To program a zoneClear Zones Clears SettingTo clear a zone Dome Settings 2 Menu Presets NumberClear Presets Restore Factory DefaultsAlarm Number AlarmsReset Delaysecs SequencesecsSelect alarm priority Alarms SettingSelect alarm number Set alarm action Set auxiliary to activate Aux SettingSet alarm contact Password Setting Enable Password Style Windows BlankingBlanking Parameters Set WindowsOperation Edit Windows LocationEdit Windows Zoom 27 Edit Windows Pan the joystick to adjust the zoom timesHeater Mode Heater SettingTemperature SET Heater DisplayCruise Setting Tracking Setting Page Tracking Boundary Reboot System Reset CameraDome Label Other Functions