Optiview TRKPTZ-18NX, TRKPTZ -26NX user manual Display Setup 3.4.1 Display Setup

Page 18

Auto Zooming Tracking Dome Camera User Manual

(2)Press iris Open.

3.4Display Setup 3.4.1 Display Setup

Move joystick to select <DISPLAY SETUP>, press Open to enter the display setup menu shown as Fig3.3.

DISPLAY SETUP
PRESET LABEL	ON
ZONE LABEL	ON
ZOOM	ON
AZIMUTH/ELEVATION	ON
CAMERA LABEL	ON
<LABEL POSITION>
BACK
EXIT

Figure 3.3 DISPLAY SETUP

Display setup enables you to program how labels are displayed on the monitor. The following labels are available:

PRESET LABEL: Identifying preset.

ZONE LABEL: Identifying zone.

ZOOM: Identifying zooming times.

AZIMUTH/ELEVATION: Amount of pan from 0 °and the amount of tilt from 0°horizontal.

CAMERA LABEL: Identifying dome.

A preset label is displayed when a preset is called. A zone label is displayed when the system moves into a zone. The zoom

17

Image 18

Contents Auto Zooming Tracking Dome Cameras Contents Dome Label Other Functions Production Introducing CharacterFunction Description Page Page Random Scan Alarms Alarms input Specification Comparison Chart Auto trackingAGC 18X 22X 23X Normal Operation Menu Configuration PTOL：PELCO-D Main Menu Select LanguageSystem Information System InformationDisplay Setup 3.4.1 Display Setup Label Position Dome Settings Camera SettingsProgram AE Mode Backlight Compensation BLCAE Mode LOW Light ModeAGC Level LOW Light LimitIris Level Bright LevelOther Menu IR CUT FilterShutter 8A Other Menu Auto IrisAuto Sharpness Auto White BalanceMotion Setting Auto FilpProportional PAN Park TimePark Action Clear Scan Stops Scan SpeedSET Scan Stops SET Manual LimitSET Azimuth Zero Power UpPower UP Action Clear Azimuth ZeroPresets Setting Select preset number Edit preset labelClear a preset Patterns SettingEdit preset scene Programe PatternZone Setting Clear PatternTo program a zone To edit a zone labelClears Setting To clear a zoneClear Zones Clear Presets Presets NumberDome Settings 2 Menu Restore Factory DefaultsReset Delaysecs AlarmsAlarm Number SequencesecsAlarms Setting Select alarm numberSelect alarm priority Set alarm action Aux Setting Set alarm contactSet auxiliary to activate Password Setting Enable Password Windows Blanking StyleSet Windows Blanking ParametersEdit Windows Location Operation27 Edit Windows Pan the joystick to adjust the zoom times Edit Windows ZoomTemperature SET Heater SettingHeater Mode Heater DisplayCruise Setting Tracking Setting Page Tracking Boundary Dome Label Reset CameraReboot System Other Functions