Canon iP5000 quick start „ Connecting to a Digital Camera, Set up the printer Turn on the printer

Advanced Printing

„Connecting to a Digital Camera

Do not connect any equipment other than the camera ready for PictBridge or Canon Bubble Jet Direct to the Direct Print Port of the printer. If you do so, electric shock, fire, or damage to the camera could result.

z When printing photos with the digital camera connected to the printer, it is advisable to use the AC adapter supplied with the camera. If you use the camera battery, be sure to charge it fully.

zThe Print Head cannot be aligned using the controls of the digital camera. The print head alignment can be performed simply by pressing the RESUME/CANCEL button on the printer, or by connecting the printer to the computer and then executing automatic print head alignment. Refer to “Aligning the Print Head” on page 61.

zDepending on the model or brand of your camera, you may have to select a print mode compliant with PictBridge before connecting the camera.

You may also have to turn on the camera or select Play mode manually after connecting the camera to the printer.

Perform necessary operations according to the instruction manual supplied with your camera.

zWhen printing from your PC, be sure to unplug the cable connecting the digital camera.

1

2

3

4

Set up the printer.

Turn on the printer.

See “Turning on the Printer” on page 2.

Load the paper in the printer.

See “Loading Paper” on page 3.

Connect the digital camera to the printer.

(1)Make sure the camera is turned off.

(2)Connect the camera to the printer using the USB cable (for connection to a computer) supplied with the camera.

23