Code label
The code labels (accessory) are required at inquiry for trouble. Use caution not to lose these labels. It is recommended to paste one of the labels onto the
Discoloration on the color filter of the MOS image sensor
•When continuously shooting a bright light source such as a spotlight, the color filter of the MOS image sensor may have deteriorat- ed and it may cause discoloration. Even when changing the fixed shooting direction after continuously shooting a spotlight for a certain period, the discoloration may remain.
•When shooting
Indication label
Refer to the indication label on the back of this product for the equipment classification and power source, etc.
What to do if “WARMING UP-PLEASE WAIT” appears on the display.
This message indicates that the temperature inside the camera has become extremely low. In such a case, wait until the temperature inside the camera goes up (around 2 hours or more in low temperatures below
Mount bracket (accessory) SW458
Do not use the mount bracket (accessory) when mounting the camera on a vehicle.
AVC Patent Portfolio License
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii)
DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C.
SEE HTTP://WWW.MPEGLA.COM
About the dehumidifying device
•This product has dehumidifying device to keep the inside at low moisture level, pre- venting condensation and quickly dissipat- ing dew if produced.
•Dew may be produced depending on the conditions of temperature, humidity, winds, and rain, and it may take time to dehumidify.
•Never seal the surfaces of the dehumidify- ing device.
Dehumidifying device |
12