Panasonic WV-SW458ME, WV-SW458E Installing the camera directly on the ceiling or wall SW458M

Note:

•The direction of “gTOP” on the camera attachment (accessory) determines the upwards direc- tion of the image on the PC monitor.

•For ceiling mounting:

Determine the direction that you want images to be displayed upwards on the PC monitor, and then mount the camera attachment with “gTOP” facing this direction.

•For wall mounting:

The camera attachment (accessory) shall be mounted with “gTOP” facing upward.

Installing the camera directly on the ceiling or wall SW458M

Place the installation template label (accessory) on the ceiling or wall, and make a hole to pass the cable.

Remove the template label, and mount the camera attachment (accessory) by fixing 4 screws (locally procured).

46 mm {1-13/16 inches} 83.5 mm {3-9/32 inches}

	Cable access hole
	(ø30 mm {ø1-3/16 inches})
Arrow	Installation template label
	(accessory)

Direction marker for installation

Camera attachment (accessory)

Fixing screws (4 pcs., locally procured)

IMPORTANT:

•For mounting a camera on a concrete surface, use an anchor bolt (M4) or an AY plug bolt (M4) for installing.

(Recommended tightening torque M4: 1.6 N·m {1.18 lbf·ft})

Note:

•The direction of “gTOP” on the camera attachment (accessory) determines the upwards direc- tion of the image on the PC monitor.

Determine the direction that you want images to be displayed upwards on the PC monitor. When installing, make sure that the direction of the arrow shown on the installation template label matches that of the direction marker for installation.

19