cSelect the camera you want to configure, and click [Access Camera].
Note:
•When cameras are displayed in [IP Setting Software] screen, click the camera with same MAC address as the MAC address printed on the camera that you want to configure.
vIt is necessary to install the viewer software “Network Camera View 4S” to display images. Follow the instructions of the wizard to start the installation.
•The “Live” page will be displayed.
•Perform the [Time & date] settings in the “Setup” - “Basic” page before using the camera.
Note:
•When no image is displayed on the “Live” page, refer to the Troubleshooting in the Operating Instructions on the provided
•It is possible to enhance the network security by encrypting the access to cameras using the HTTPS function. Refer to the Operating instructions on the provided
•Click the [Setup] button on the “Live” page, the user authentication window will be displayed. Enter the default user name and password as follows, and log in.
User name: admin
Password: 12345
•When changing settings related to the network settings, such as connection mode, IP address, and subnet mask, click the [Network Settings] button in [IP Setting Software] screen as shown in step 3, then change each setting.
•Due to security enhancements in “IP Setting Software”, “Network settings” of the camera to be configured cannot be changed when around 20 minutes have passed after turning on the power of the camera. (When the effective period is set to “20 min” in the “Easy IP Setup accommodate period”.)
However, settings can be changed after 20 minutes for cameras in the initial set mode.
35