Panasonic WV-SW458E, WV-SW458ME installation instructions About the Initial SET button

Page 16

SD memory card slot cover

SD memory card slot

SD memory card

INITIAL SET button Link indicator error indicator (lit when linking)

Access indicator (blinks when accessing)

About the [INITIAL SET] button

After turning off the power of the camera, turn on the power of the camera while holding down this button, and wait for about 5 seconds or more without releasing the button. Wait about 2 minutes after releasing the button. The camera will start up and the settings including the network settings will be initialized. Do not turn off the power of the camera during the process of initialization.

Before initializing the settings, it is recommended to copy down the settings in advance.

About the indicators inside the SD memory card slot cover

The Access indicator, Link indicator, and SD memory card error indicator inside the SD memory card slot cover can be turned off. (Indicators are set to light or blink in the default settings.)

Turn off the indicators as required according to the installation environment. (Operating Instructions (included in the CD-ROM))

16

Image 16
Contents Model No. WV-SW458/WV-SW458M WV-SW458E/WV-SW458ME WV-SW458E, WV-SW458ME Contents Important safety instructions Disclaimer of warranty Limitation of liabilityAbout notations PrefaceMain functions System requirements for a PC CPUTrademarks and registered trademarks CopyrightNetwork security Precautions Do not damage the power cable Turn the power off when cleaning this productPrecautions for use This product has no power switch Cleaning this product bodyMount bracket accessory SW458 Code labelDiscoloration on the color filter of the MOS image sensor Indication labelPrecautions for installation Installing placeDo not place this product in the following places About the network connectionTime & date setting Procure fixing screws separatelyRadio disturbance RouterMajor operating controls About the indicators inside the SD memory card slot cover About the Initial SET buttonPreparations Using the side cable access hole SW458M Mounting hole patternInstalling the camera directly on the ceiling or wall SW458M Using the mount bracket accessory SW458 Ø1-1/16 inches Cable access hole For use of the hole Camera attachment accessory Fixing screws accessory Insert/remove an SD memory card Power cable ConnectionWV-SW458 WV-SW458MAlarm Alarm OUT, AUX OUTRatings Terminal name When using 12 V DC power supply*1 When using PoE IEEE802.3af compliantHow to wind the supplied waterproof tape LAN cableRequired cable Installation Using a two-gang junction boxUsing the mount bracket SW458 Page Use the bit for tamperproof screw accessory Configure the network settings Configuring the camera so that it can be accessed from a PCPage Troubleshooting When using DC power supplySpecifications Limited Power SourceAlarm in 1, Alarm in 2/ Alarm OUT BasicATW1/ ATW2/ AWC ELCViqs Network LensJpeg Jpeg Mjpeg IGMP, ICMP, ARPStandard accessories Optional accessoriesPage Page For U.S. and Canada For business users in the European UnionPGQX1203YA