Panasonic WV-SW458E, WV-SW458ME installation instructions Connection, Power cable

Connection

Caution:

• ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY or LIMITED POWER SOURCE.

Turn off a circuit breaker before making a connection. Before starting the connection, prepare the required devices and cables.

Note:

•When using the mount bracket (accessory), it is possible to connect the cables after mounting the camera onto the mount bracket. SW458

•Refer to page 20 when connecting the conduit.

<WV-SW458>		Network cable	LAN cable (category 5 or better)
	* E model only	RJ-45 connector (female)
		Alarm input/output cable 4P alarm cable (accessory)
			2P power cable (accessory)		12 V DC (red)
		Power cable			GND (black)
		(12 V DC)
				Power cable
		Microphone/line input cable (white)			12 V DC
				Red	Positive
		Audio output cable (black)		Black	Negative

<WV-SW458M>	Network cable	LAN cable (category 5 or better)
	M12 connector (male)
	Alarm input/output cable	4P alarm cable (accessory)
		2P power cable (accessory)	12 V DC (red)
	Power cable		GND (black)
	(12 V DC)
		Power cable
			12 V DC
	Microphone/line input cable (white) Red		Positive
		Black	Negative
	Audio output cable (black)

25