x Engage the camera attachment fixing screws of the camera with the screw hole of the camera attachment (accessory) and rotate the camera in the direction of the arrow to secure the cam- era to the camera attachment (accessory).
Rotate the camera until a click is heard so that the projection of the camera attachment (acces- sory) will be set to the “LOCK” position.
c Secure the camera with the camera fixing screw. (Recommended tightening torque: 1.37 N·m {1.01 lbf·ft})
IMPORTANT:
•Ensure that the camera fixing screw is firm- ly secured.
Failure to observe this may cause a mal- function or the product to fall, resulting in injury or accidents.
v Connect the cables on the side of the mount bracket. (☞ Page 25)
Waterproof the connecting portion. (☞ Page 28)
IMPORTANT:
•Disconnect the 12 V DC power supply and
PoE device for power supply to prevent power from being supplied during mount- ing work.
Projection
Camera fixing screw
Make cable connection and waterproof the connected section.
32