Panasonic WV-SW458 Specifications, Basic, Limited Power Source, Alarm in 1, Alarm in 2/ Alarm OUT

Page 37

Specifications

• Basic

Power source:

12 V DC, PoE (IEEE802.3af compliant)

Power consumption:

12 V DC*: 540 mA/ 6.5 W

 

PoE 48 V: 125 mA/ 6.0 W (Class 2 devices)

 

* ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY or

 

LIMITED POWER SOURCE.

Ambient operating temperature:

-40 °C to +50 °C {-40 °F to 122 °F}

Ambient operating humidity:

Less than 90 % (no condensation)

Waterproof:

Main body: IP66 (IEC60529)

 

* Only when installation work specified in this book is properly

 

performed and appropriate waterproof treatment is performed

Shock resistance:

Compliant with 50 J (IEC 60068-2-75)/IK10 (IEC 62262)

External I/O terminal cable:

ALARM IN 1, ALARM IN 2/ ALARM OUT,

 

ALARM IN 3/ AUX OUT (x1 for each)

Microphone/line input cable:

ø3.5 mm monaural mini jack

 

Input impedance: Approx. 2 kΩ

For microphone input:

Applicable microphone: Plug-in power type

 

Supply voltage: 2.5 V ±0.5 V

For line input:

Input level: Approx. –10 dBV

Audio output cable:

ø3.5 mm stereo mini jack (monaural output)

 

Output impedance: Approx. 600 Ω

 

Line level

 

Mounting method:

Ceiling/ Wall

 

Dimensions:

SW458

Main body:

 

ø154 mm x 50.5 mm (H) {ø6-1/16 inches x

 

 

 

 

2 inches (H)}

 

 

Including the mount bracket:

 

 

ø164 mm x 88 mm (H) {ø6-15/32 inches x

 

 

3-15/32 inches (H)}

 

 

191.5 mm (W) {7-17/32 inches (W)}

 

 

(including projection of the base cover fixing

 

 

screw)

 

SW458M

ø154 mm x 50.5 mm (H) {ø6-1/16 inches x

 

2 inches (H)}

 

 

Mass:

SW458

Approx. 1.1 kg {2.43 lbs}

 

 

(including the camera attachment and the

 

 

mount bracket)

 

SW458M

Approx. 0.8 kg {1.76 lbs}

 

 

(including the camera attachment)

Finish:

Main body: Aluminum die cast, light gray

 

Dome cover: Clear polycarbonate resin

• Camera

 

 

Image sensor:

1/3-type MOS image sensor

Effective pixels:

Approx. 3.1 megapixels

Scanning area:

4.51 mm (H) × 3.38 mm (V) {3/16 inches (H) x 1/8 inches (V)}

37

Image 37
Contents Model No. WV-SW458/WV-SW458M WV-SW458E/WV-SW458ME WV-SW458E, WV-SW458ME Contents Important safety instructions Limitation of liability Disclaimer of warrantyAbout notations PrefaceMain functions CPU System requirements for a PCCopyright Trademarks and registered trademarksNetwork security Precautions Turn the power off when cleaning this product Do not damage the power cablePrecautions for use This product has no power switch Cleaning this product bodyCode label Mount bracket accessory SW458Discoloration on the color filter of the MOS image sensor Indication labelInstalling place Precautions for installationDo not place this product in the following places About the network connectionProcure fixing screws separately Time & date settingRadio disturbance RouterMajor operating controls About the Initial SET button About the indicators inside the SD memory card slot coverPreparations Mounting hole pattern Using the side cable access hole SW458MInstalling the camera directly on the ceiling or wall SW458M Using the mount bracket accessory SW458 Ø1-1/16 inches Cable access hole For use of the hole Camera attachment accessory Fixing screws accessory Insert/remove an SD memory card Connection Power cableWV-SW458 WV-SW458MAlarm Alarm OUT, AUX OUTRatings Terminal name When using PoE IEEE802.3af compliant When using 12 V DC power supply*1LAN cable How to wind the supplied waterproof tapeRequired cable Using a two-gang junction box InstallationUsing the mount bracket SW458 Page Use the bit for tamperproof screw accessory Configuring the camera so that it can be accessed from a PC Configure the network settingsPage When using DC power supply TroubleshootingLimited Power Source SpecificationsAlarm in 1, Alarm in 2/ Alarm OUT BasicATW1/ ATW2/ AWC ELCViqs Network LensJpeg IGMP, ICMP, ARP Jpeg MjpegOptional accessories Standard accessoriesPage Page For U.S. and Canada For business users in the European UnionPGQX1203YA