Axis Communications Q1635 user manual Image Appearance, Image Correction, White Balance

Page 24

AXIS Q1635 Fixed Network Camera

Video and Audio

-Settings in uploaded applications

Image Appearance

Increasing the Color level increases the color saturation. The value 100 gives maximum color saturation. The value 0 gives a black and white image.

The image Brightness can be adjusted in the range 0–100, where a higher value produces a brighter image.

Increasing the Sharpness can increase bandwidth usage. A sharper image might increase image noise especially in low light conditions. A lower setting reduces image noise, but the whole image will appear less sharp.

The Contrast changes the relative difference between light and dark. It can be adjusted using the slidebar.

Local Contrast applies contrast to a specific area of the image. Use the slider to adjust the contrast, where a higher value produces an image with high contrast between the dark and light areas.

Image Correction

Image correction settings can compensate for different types of image issues. Select Electronic image stabilization (EIS) to compensate for vibrations or select Barrel distortion correction to compensate for lens effects.

Note

•It is not recommended to use Electronic image stabilization (EIS) together with Wide Dynamic Range (WDR).

•Electronic image stabilization (EIS) cannot be used together with Barrel distortion correction.

Electronic Image Stabilization (EIS)

When monitoring an environment that is subject to vibrations such as a train station, or when the camera is mounted on a pole, images may appear unsteady. To automatically improve image stability, select Electronic image stabilization (EIS) from Video & Audio > Camera Settings.

Barrel Distortion Correction

Barrel distortion is a lens effect that causes an image to look curved. The extent of distortion depends on the zoom level.

To edit barrel distortion settings, click Edit from Video & Audio > Camera Settings > Image Correction. In the Barrel Distortion Correction window, adjust the slider to correct the distortion, using the grid for assistance.

Enable Defog

Enable this feature from Video & Audio > Camera Settings to counter the effects of foggy weather and get a clear image. Or click the Defog button in the product’s Live View page. This button can be configured to appear in the Live View page from Live View Config > Live View Layout. Use the Defog Effect slider to adjust the degree of countering as required.

Note

Too much brightness can negatively impact image quality when defog is active.

White Balance

White balance is used to make colors in the image appear the same regardless of the color temperature of the light source. The Axis product can be set to automatically identify the light source and compensate for its color. Alternatively, select the type of light

source from the drop-down list. For a description of each available setting, see the online help.

The white balance window is enabled for the Automatic and Automatic outdoor options that appear in the White balance drop-down list. Select one of the options from the drop-down list to set the white balance window properties. Select Automatic to use the default settings for the Automatic and Automatic outdoor options (in the White balance drop-down list). Select Custom to manually set a reference window for white balance in the view area.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Axis Q1635 Fixed Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q1635 Fixed Network CameraConnectors Performance Considerations Hardware Overview Connectors and Buttons Network ConnectorConnector Power ConnectorLED Indicators Buzzer Signal for Focus Assistant Status LED Behavior for Focus AssistantReplace the Lens Access the Product Access from a BrowserAccess from the Internet Set the Root Password Set Power Line FrequencyPTZ Mode Configure Capture ModeGo to Setup Events Controls on the Live ViewManual Trigger Axis Media Control viewer toolbar PTZ ControlsTo show the manual trigger buttons in the Live View AMC Audio ControlsAxis Q1635 Fixed Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupAdjust Focus Focus Assistant Set Up Video Streams Video and AudioPixel Counter ImageClick Save to apply the new settings 264Camera Settings Capture ModeGo to Setup Video & Audio Camera Settings Stream ProfilesImage Appearance Image CorrectionWhite Balance Exposure Settings Wide Dynamic RangeShutter & Gain Set Shutter toIris configuration Iris adjustmentImage Settings View AreaSelect an Aspect ratio and a Video stream resolution OverlayOverlay Image Go to Video & Audio View AreaUse Overlay Text in an Action Rule Go to Video & Audio Overlay ImageGo to Events Action Rules Click Add to create a new rulePrivacy Mask FocusBasic AdvancedSet Up Audio Audio ModesAudio Input Audio Clips Audio OutputConfigure the Live View Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionGo to Setup Live View Config User Defined LinksOutput Buttons For more information about I/O ports, see I/O Ports onPreset Positions PTZ Pan Tilt ZoomGuard Tour AdvancedInstall PTZ Driver Operator Same as administrator but with lower priorityControl Queue Detectors Camera TamperingShock Detection Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersDefault values Audio DetectionRecommended values 15% 60-90% 75-95%Install Application Go to Setup ApplicationsApplications Application LicensesAxis Q1635 Fixed Network Camera Set Up Action Rules EventsTriggers Go to Events Action Rules and click AddInput Signal HardwareStorage SystemAdd Recipients ActionsRecipient Types PTZ ControlSet Up Email Recipients Recipient Use with actionSet Up Recurrences Create SchedulesTo create a new schedule Go to Events Schedules and click AddRecordings Recording ListContinuous Recording Go to Recordings ListClick Save to save and start the recording Languages System Options SecurityUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Go to Setup System Options Security Certificates Click Install certificate and upload the certificateDate & Time Audio SupportBasic TCP/IP Settings NetworkAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 Storage BonjourSD Card Mount and Unmount SD CardPorts & Devices Network SharePorts COM PortMaintenance Port StatusAccelerometer See the online helpSupport Reset to Factory Default Settings Plain ConfigTroubleshooting Upgrade the FirmwareEmergency Recovery Procedure Check the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externallyProblems with streaming H.264 Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Setup Video & Audio Camera SettingsSettings Storage and disk management problemsNo audio Poor audio qualityTechnical Specifications Function/group Specifications Audio Audio streaming Specification Network SecurityAudio input Audio outputFunction/group Specifications PowerConnectors WeightConnectors WarrantyFunction Pin Specifications PortuguesePin terminal block for power input Mm audio connectors stereo Tip Ring SleeveMicrophone/Line Ground Line out mono GroundRS485/422 Connector RX pair for all modes combined RX/TX for 2-wire RS485Performance Considerations Function PinM1.8
Related manuals
Manual 24 pages 60.17 Kb
Top Page Image Contents