Axis Communications Q1635 NTP Configuration, Host Name Configuration, Link-Local IPv4 Address

Page 54

AXIS Q1635 Fixed Network Camera

System Options

Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host name in the fully qualified domain name myserver.mycompany.com where mycompany.com is the domain name.

Primary/Secondary DNS server - Enter the IP addresses of the primary and secondary DNS servers. The secondary DNS server is optional and will be used if the primary is unavailable.

NTP Configuration

NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server.

To make manual settings, select Use the following NTP server address and enter the host name or IP address of the NTP server.

Host Name Configuration

The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.

Select Obtain host name via IPv4 DHCP to use host name provided by the DHCP server running on IPv4.

Select Use the host name to set the host name manually.

Select Enable dynamic DNS updates to dynamically update local DNS servers whenever the Axis product’s IP address changes.

For more information, see the online help .

Link-Local IPv4 Address

Link-Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access the product from other hosts on the same segment on the local network. The product can have a Link-Local IP and a static or DHCP-supplied IP address at the same time.

This function can be disabled under System Options > Network > TCP/IP > Advanced.

HTTP

The HTTP port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 80, any port in the range 1024–65535 can be used.

HTTPS

The HTTPS port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 443, any port in the range 1024–65535 can be used.

To enable HTTPS, go to System Options > Security > HTTPS. For more information, see HTTPS on page 49.

NAT traversal (port mapping) for IPv4

A network router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwarding network traffic from the private network to the “outside”, that is, the Internet. Security on the private network (LAN) is increased since most routers are pre-configured to stop attempts to access the private network (LAN) from the public network (Internet).

Use NAT traversal when the Axis product is located on an intranet (LAN) and you wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router is forwarded to the product.

NAT traversal is configured under System Options > Network > TCP/IP > Advanced.

54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Axis Q1635 Fixed Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q1635 Fixed Network CameraConnectors Performance Considerations Hardware Overview Connector Connectors and ButtonsNetwork Connector Power ConnectorLED Indicators Buzzer Signal for Focus Assistant Status LED Behavior for Focus AssistantReplace the Lens Access the Product Access from a BrowserAccess from the Internet PTZ Mode Set the Root PasswordSet Power Line Frequency Configure Capture ModeGo to Setup Events Controls on the Live ViewManual Trigger To show the manual trigger buttons in the Live View Axis Media Control viewer toolbarPTZ Controls AMC Audio ControlsAxis Q1635 Fixed Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupAdjust Focus Focus Assistant Pixel Counter Set Up Video StreamsVideo and Audio ImageClick Save to apply the new settings 264Go to Setup Video & Audio Camera Settings Camera SettingsCapture Mode Stream ProfilesImage Appearance Image CorrectionWhite Balance Shutter & Gain Exposure SettingsWide Dynamic Range Set Shutter toImage Settings Iris configurationIris adjustment View AreaOverlay Image Select an Aspect ratio and a Video stream resolutionOverlay Go to Video & Audio View AreaGo to Events Action Rules Use Overlay Text in an Action RuleGo to Video & Audio Overlay Image Click Add to create a new ruleBasic Privacy MaskFocus AdvancedSet Up Audio Audio ModesAudio Input Audio Clips Audio OutputViewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer DescriptionOutput Buttons Go to Setup Live View ConfigUser Defined Links For more information about I/O ports, see I/O Ports onGuard Tour Preset PositionsPTZ Pan Tilt Zoom AdvancedInstall PTZ Driver Operator Same as administrator but with lower priorityControl Queue Shock Detection DetectorsCamera Tampering Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersRecommended values Default valuesAudio Detection 15% 60-90% 75-95%Applications Install ApplicationGo to Setup Applications Application LicensesAxis Q1635 Fixed Network Camera Triggers Set Up Action RulesEvents Go to Events Action Rules and click AddStorage Input SignalHardware SystemRecipient Types Add RecipientsActions PTZ ControlSet Up Email Recipients Recipient Use with actionTo create a new schedule Set Up RecurrencesCreate Schedules Go to Events Schedules and click AddContinuous Recording RecordingsRecording List Go to Recordings ListClick Save to save and start the recording Languages Users System OptionsSecurity IP Address FilterIeee CertificatesGo to System Options Security Ieee Date & Time Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Audio SupportBasic TCP/IP Settings NetworkAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 SD Card StorageBonjour Mount and Unmount SD CardPorts Ports & DevicesNetwork Share COM PortAccelerometer MaintenancePort Status See the online helpSupport Reset to Factory Default Settings Plain ConfigEmergency Recovery Procedure TroubleshootingUpgrade the Firmware Check the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Setup Video & Audio Camera SettingsNo audio SettingsStorage and disk management problems Poor audio qualityTechnical Specifications Audio input Function/group Specifications Audio Audio streamingSpecification Network Security Audio outputConnectors Function/group SpecificationsPower WeightFunction Pin Specifications ConnectorsWarranty PortugueseMicrophone/Line Ground Pin terminal block for power inputMm audio connectors stereo Tip Ring Sleeve Line out mono GroundPerformance Considerations RS485/422 ConnectorRX pair for all modes combined RX/TX for 2-wire RS485 Function PinM1.8
Related manuals
Manual 24 pages 60.17 Kb
Top Page Image Contents