Axis Communications Q1635 user manual QoS Quality of Service, Ftp

Page 55

AXIS Q1635 Fixed Network Camera

System Options

Note

•For NAT traversal to work, this must be supported by the router. The router must also support UPnPTM.

•In this context, router refers to any network routing device such as a NAT router, Network router, Internet Gateway, Broadband router, Broadband sharing device, or a software such as a firewall.

Enable/Disable - When enabled, the Axis product attempts to configure port mapping in a NAT router on your network, using UPnPTM. Note that UPnPTM must be enabled in the product (see System Options > Network > UPnP).

Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the field. If no router is specified, the product automatically searches for NAT routers on your network. If more than one router is found, the default router is selected.

Alternative HTTP port - Select this option to manually define an external HTTP port. Enter a port in the range 1024–65535. If the port field is empty or contains the default setting, which is 0, a port number is automatically selected when enabling NAT traversal.

Note

•An alternative HTTP port can be used or be active even if NAT traversal is disabled. This is useful if your NAT router does not support UPnP and you need to manually configure port forwarding in the NAT router.

•If you attempt to manually enter a port that is already in use, another available port is automatically selected.

•When the port is selected automatically it is displayed in this field. To change this, enter a new port number and click Save.

FTP

The FTP server running in the Axis product enables upload of new firmware, user applications, etc. The FTP server can be disabled under System Options > Network > TCP/IP > Advanced.

Note

This FTP server has nothing to do with the product’s ability to transfer images via FTP to other locations and servers.

RTSP

The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number can be changed under System Options > Network > TCP/IP > Advanced. The default port is 554.

Note

H.264 video streams will not be available if the RTSP server is disabled.

SOCKS

SOCKS is a networking proxy protocol. The Axis product can be configured to use a SOCKS server to reach networks on the other side of a firewall or proxy server. This functionality is useful if the Axis product is located on a local network behind a firewall, and notifications, uploads, alarms, etc need to be sent to a destination outside the local network (for example the Internet).

SOCKS is configured under System Options > Network > SOCKS. For more information, see the online help .

QoS (Quality of Service)

QoS (Quality of Service) guarantees a certain level of a specified resource to selected traffic on a network. A QoS-aware network prioritizes network traffic and provides a greater network reliability by controlling the amount of bandwidth an application may use.

The QoS settings are configured under System Options > Network > QoS. Using DSCP (Differentiated Services Codepoint) values, the Axis product can mark different types of traffic.

Note

Live audio DSCP will be equal to live video DSCP if H.264 over RTSP is used.

55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents Axis Q1635 Fixed Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis Q1635 Fixed Network Camera Table of ContentsConnectors Performance Considerations Hardware Overview Power Connector Connectors and ButtonsNetwork Connector ConnectorLED Indicators Status LED Behavior for Focus Assistant Buzzer Signal for Focus AssistantReplace the Lens Access from a Browser Access the ProductAccess from the Internet Configure Capture Mode Set the Root PasswordSet Power Line Frequency PTZ ModeControls on the Live View Go to Setup EventsManual Trigger AMC Audio Controls Axis Media Control viewer toolbarPTZ Controls To show the manual trigger buttons in the Live ViewAxis Q1635 Fixed Network Camera Media Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsBasic Setup Set Up the ProductAdjust Focus Focus Assistant Image Set Up Video StreamsVideo and Audio Pixel Counter264 Click Save to apply the new settingsStream Profiles Camera SettingsCapture Mode Go to Setup Video & Audio Camera SettingsImage Correction Image AppearanceWhite Balance Set Shutter to Exposure SettingsWide Dynamic Range Shutter & GainView Area Iris configurationIris adjustment Image SettingsGo to Video & Audio View Area Select an Aspect ratio and a Video stream resolutionOverlay Overlay ImageClick Add to create a new rule Use Overlay Text in an Action RuleGo to Video & Audio Overlay Image Go to Events Action RulesAdvanced Privacy MaskFocus BasicAudio Modes Set Up AudioAudio Input Audio Output Audio ClipsBrowser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsFor more information about I/O ports, see I/O Ports on Go to Setup Live View ConfigUser Defined Links Output ButtonsAdvanced Preset PositionsPTZ Pan Tilt Zoom Guard TourOperator Same as administrator but with lower priority Install PTZ DriverControl Queue Motion Detection DetectorsCamera Tampering Shock DetectionMotion Detection Parameters Set Up Motion Detection Windows15% 60-90% 75-95% Default valuesAudio Detection Recommended valuesApplication Licenses Install ApplicationGo to Setup Applications ApplicationsAxis Q1635 Fixed Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents TriggersSystem Input SignalHardware StoragePTZ Control Add RecipientsActions Recipient TypesRecipient Use with action Set Up Email RecipientsGo to Events Schedules and click Add Set Up RecurrencesCreate Schedules To create a new scheduleGo to Recordings List RecordingsRecording List Continuous RecordingClick Save to save and start the recording Languages IP Address Filter System OptionsSecurity UsersCertificates IeeeGo to System Options Security Ieee Audio Support Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 Mount and Unmount SD Card StorageBonjour SD CardCOM Port Ports & DevicesNetwork Share PortsSee the online help MaintenancePort Status AccelerometerSupport Plain Config Reset to Factory Default SettingsCheck the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserSetup Video & Audio Camera Settings Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalPoor audio quality SettingsStorage and disk management problems No audioTechnical Specifications Audio output Function/group Specifications Audio Audio streamingSpecification Network Security Audio inputWeight Function/group SpecificationsPower ConnectorsPortuguese ConnectorsWarranty Function Pin SpecificationsLine out mono Ground Pin terminal block for power inputMm audio connectors stereo Tip Ring Sleeve Microphone/Line GroundFunction Pin RS485/422 ConnectorRX pair for all modes combined RX/TX for 2-wire RS485 Performance ConsiderationsM1.8
Related manuals
Manual 24 pages 60.17 Kb
Top Page Image Contents