Axis Communications Q1635 user manual Maintenance, Port Status, Accelerometer, See the online help

Page 59

AXIS Q1635 Fixed Network Camera

System Options

•Generic HTTP allows the Axis product to receive data and send commands via HTTP.

•Pan Tilt Zoom is used to control a PTZ device. The PTZ device requires a driver. See Install PTZ Driver for more information. Drivers can be downloaded from www.axis.com

•Generic TCP/IPallows the Axis product to receive data and send commands via TCP/IP. Daisy chain server - Allows Daisy chain clients to communicate with the Axis product.

Select the desired Port Type from the drop-down list. For more information on Serial Port Settings and Daisy Chain Port Settings

see the online help .

Port Status

The list on the System Options > Ports & Devices > Port Status page shows the status of the product’s input and output ports.

Accelerometer

Tilt angle indicates the angle to which the camera’s lens holder is tilted. A 0° tilt is when the camera is pointing to the ground. It’s possible to have a tilt angle between 0 and 180°. To tilt to 180°, tilt to an angle of 90°, rotate the lens holder and tilt to a further 90°.

Rotation angle indicates the angle to which the camera’s lens holder is rotated. The rotation range is between 0 to 360°. The camera is considered to be in a level position when the rotation angle is 0°, 90°, 360° or 270°.

The leveling assistant that helps to level the camera is enabled by default. To disable it, de-select the Enable leveling assistant option from System Options > Ports & Devices > Accelerometer and click Save. To refresh the page and view the saved setting, click Reset.

Maintenance

The Axis product provides several maintenance functions. These are available under System Options > Maintenance.

Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings.

Note

A restart clears all entries in the Server Report.

Click Restore to reset most settings to the factory default values. The following settings are not affected:

•the boot protocol (DHCP or static)

•the static IP address

•the default router

•the subnet mask

•the system time

•the IEEE 802.1X settings

•the focus position

•uploaded applications are kept but must be restarted

Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The Axis product can also be reset to factory default using the control button, see Reset to Factory Default Settings on page 61.

To identify the product or test the Status LED, click Flash LED under Identify and specify the duration in seconds, minutes or hours. This can be useful for identifying the product among other products installed in the same location.

For information about firmware upgrade, see Upgrade the Firmware on page 62.

59

Page 58 Page 60
Image 59
Page 58 Page 60
Contents Axis Q1635 Fixed Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis Q1635 Fixed Network Camera Table of ContentsConnectors Performance Considerations Hardware Overview Power Connector Connectors and ButtonsNetwork Connector ConnectorLED Indicators Status LED Behavior for Focus Assistant Buzzer Signal for Focus AssistantReplace the Lens Access from the Internet Access the ProductAccess from a Browser Configure Capture Mode Set the Root PasswordSet Power Line Frequency PTZ ModeManual Trigger Go to Setup EventsControls on the Live View AMC Audio Controls Axis Media Control viewer toolbarPTZ Controls To show the manual trigger buttons in the Live ViewAxis Q1635 Fixed Network Camera Axis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsAdjust Focus Set Up the ProductBasic Setup Focus Assistant Image Set Up Video StreamsVideo and Audio Pixel Counter264 Click Save to apply the new settingsStream Profiles Camera SettingsCapture Mode Go to Setup Video & Audio Camera SettingsWhite Balance Image AppearanceImage Correction Set Shutter to Exposure SettingsWide Dynamic Range Shutter & GainView Area Iris configurationIris adjustment Image SettingsGo to Video & Audio View Area Select an Aspect ratio and a Video stream resolutionOverlay Overlay ImageClick Add to create a new rule Use Overlay Text in an Action RuleGo to Video & Audio Overlay Image Go to Events Action RulesAdvanced Privacy MaskFocus BasicAudio Input Set Up AudioAudio Modes Audio Output Audio ClipsBrowser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsFor more information about I/O ports, see I/O Ports on Go to Setup Live View ConfigUser Defined Links Output ButtonsAdvanced Preset PositionsPTZ Pan Tilt Zoom Guard TourControl Queue Install PTZ DriverOperator Same as administrator but with lower priority Motion Detection DetectorsCamera Tampering Shock DetectionMotion Detection Parameters Set Up Motion Detection Windows15% 60-90% 75-95% Default valuesAudio Detection Recommended valuesApplication Licenses Install ApplicationGo to Setup Applications ApplicationsAxis Q1635 Fixed Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents TriggersSystem Input SignalHardware StoragePTZ Control Add RecipientsActions Recipient TypesRecipient Use with action Set Up Email RecipientsGo to Events Schedules and click Add Set Up RecurrencesCreate Schedules To create a new scheduleGo to Recordings List RecordingsRecording List Continuous RecordingClick Save to save and start the recording Languages IP Address Filter System OptionsSecurity UsersGo to System Options Security Ieee IeeeCertificates Audio Support Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of Service RTP/H.264 UPnPTM can be disabled under System Options Network UPnPTM UPnPTM Mount and Unmount SD Card StorageBonjour SD CardCOM Port Ports & DevicesNetwork Share PortsSee the online help MaintenancePort Status AccelerometerSupport Plain Config Reset to Factory Default SettingsCheck the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserSetup Video & Audio Camera Settings Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalPoor audio quality SettingsStorage and disk management problems No audioTechnical Specifications Audio output Function/group Specifications Audio Audio streamingSpecification Network Security Audio inputWeight Function/group SpecificationsPower ConnectorsPortuguese ConnectorsWarranty Function Pin SpecificationsLine out mono Ground Pin terminal block for power inputMm audio connectors stereo Tip Ring Sleeve Microphone/Line GroundFunction Pin RS485/422 ConnectorRX pair for all modes combined RX/TX for 2-wire RS485 Performance ConsiderationsM1.8
Related manuals
Manual 24 pages 60.17 Kb
Top Page Image Contents