Axis Communications Q1635 user manual Set Up Audio, Audio Modes, Audio Input

Page 30

AXIS Q1635 Fixed Network Camera

Video and Audio

Set Up Audio

To change the product’s audio settings, go to Video & Audio > Audio Settings.

To include the audio stream in a video stream, go to Video & Audio > Video Stream. Under the Audio tab, select Enable audio.

Each stream profile is a separate video stream. To include the audio stream in all stream profiles, go to the audio tab in each stream profile settings page and enable audio. For more information, see Stream Profiles on page 23.

If you have enabled view areas, remember that each view area is a separate video stream. To include the audio stream in all view areas, go to the audio tab in each video stream page and enable audio. For more information see View Area on page 26.

Audio Modes

The Axis product supports the following audio modes:

Full duplex - Simultaneous two-way audio allowing the Axis product to transmit and receive audio at the same time. There is no echo cancellation; if feedback loops appear, try moving the microphone or the speaker.

Half-duplex - Audio can be transmitted to and from the Axis product but only in one direction at a time. To transmit audio using the Live View page, use the Talk and Listen buttons, see AMC Audio Controls on page 14.

Simplex — Network Camera speaker only - Audio is transmitted from a client to the Axis product and can be played by a speaker connected to the product. To transmit audio using the Live View page, the Talk and Microphone buttons must both be active, see AMC Audio Controls on page 14.

Simplex — Network Camera microphone only - Audio captured by the product microphone is transmitted from the Axis product to one or more clients.

To set the audio mode, go to Video & Audio > Audio Settings and select the desired mode from the Audio mode drop-down list.

Audio Input

An external microphone or a line source can be connected to the Audio-in connector. Configure the audio input settings under Video & Audio > Audio Settings.

Note

When used in an outdoor enclosure, the internal microphone on this Axis product cannot be used.

Note

The internal microphone is used by default; the external microphone is used when connected. It is possible to disable the internal microphone by connecting a plug to the mic input.

The following audio sources are available under Audio Input:

•Internal Microphone: Select this audio source to use the internal microphone.

•External Microphone: Select this audio source to use the external microphone.

•Line: Select this audio source to use a Line in device, that is, an audio mixer for multiple microphones or a microphone with a built-in amplifier .

Select the +30 dB microphone boost option to amplify the signal of the external microphone connected to the Axis product. This option is not available when the Line source is selected.

The Microphone power option provides DC power for an external microphone. Microphone power should only be used with microphones that require this kind of powering, that is, electret microphones. This setting should not be enabled when using a dynamic or battery powered microphone. For use of a professional microphone requiring 12 V phantom power, there is a built-in power supply.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Axis Q1635 Fixed Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q1635 Fixed Network CameraConnectors Performance Considerations Hardware Overview Connector Connectors and ButtonsNetwork Connector Power ConnectorLED Indicators Buzzer Signal for Focus Assistant Status LED Behavior for Focus AssistantReplace the Lens Access the Product Access from a BrowserAccess from the Internet PTZ Mode Set the Root PasswordSet Power Line Frequency Configure Capture ModeGo to Setup Events Controls on the Live ViewManual Trigger To show the manual trigger buttons in the Live View Axis Media Control viewer toolbarPTZ Controls AMC Audio ControlsAxis Q1635 Fixed Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupAdjust Focus Focus Assistant Pixel Counter Set Up Video StreamsVideo and Audio ImageClick Save to apply the new settings 264Go to Setup Video & Audio Camera Settings Camera SettingsCapture Mode Stream ProfilesImage Appearance Image CorrectionWhite Balance Shutter & Gain Exposure SettingsWide Dynamic Range Set Shutter toImage Settings Iris configurationIris adjustment View AreaOverlay Image Select an Aspect ratio and a Video stream resolutionOverlay Go to Video & Audio View AreaGo to Events Action Rules Use Overlay Text in an Action RuleGo to Video & Audio Overlay Image Click Add to create a new ruleBasic Privacy MaskFocus AdvancedSet Up Audio Audio ModesAudio Input Audio Clips Audio OutputViewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer DescriptionOutput Buttons Go to Setup Live View ConfigUser Defined Links For more information about I/O ports, see I/O Ports onGuard Tour Preset PositionsPTZ Pan Tilt Zoom AdvancedInstall PTZ Driver Operator Same as administrator but with lower priorityControl Queue Shock Detection DetectorsCamera Tampering Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersRecommended values Default valuesAudio Detection 15% 60-90% 75-95%Applications Install ApplicationGo to Setup Applications Application LicensesAxis Q1635 Fixed Network Camera Triggers Set Up Action RulesEvents Go to Events Action Rules and click AddStorage Input SignalHardware SystemRecipient Types Add RecipientsActions PTZ ControlSet Up Email Recipients Recipient Use with actionTo create a new schedule Set Up RecurrencesCreate Schedules Go to Events Schedules and click AddContinuous Recording RecordingsRecording List Go to Recordings ListClick Save to save and start the recording Languages Users System OptionsSecurity IP Address FilterIeee CertificatesGo to System Options Security Ieee Date & Time Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Audio SupportBasic TCP/IP Settings NetworkAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 SD Card StorageBonjour Mount and Unmount SD CardPorts Ports & DevicesNetwork Share COM PortAccelerometer MaintenancePort Status See the online helpSupport Reset to Factory Default Settings Plain ConfigEmergency Recovery Procedure TroubleshootingUpgrade the Firmware Check the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Setup Video & Audio Camera SettingsNo audio SettingsStorage and disk management problems Poor audio qualityTechnical Specifications Audio input Function/group Specifications Audio Audio streamingSpecification Network Security Audio outputConnectors Function/group SpecificationsPower WeightFunction Pin Specifications ConnectorsWarranty PortugueseMicrophone/Line Ground Pin terminal block for power inputMm audio connectors stereo Tip Ring Sleeve Line out mono GroundPerformance Considerations RS485/422 ConnectorRX pair for all modes combined RX/TX for 2-wire RS485 Function PinM1.8
Related manuals
Manual 24 pages 60.17 Kb
Top Page Image Contents