Axis Communications Q1635 user manual Install PTZ Driver, Control Queue

Page 35

AXIS Q1635 Fixed Network Camera

PTZ (Pan Tilt Zoom)

•Focus control

•Iris control

To disable specific controls, deselect the options under Enable/Disable controls.

If using multiple view areas, deselecting a control will only disable the control in the selected view area.

Install PTZ Driver

This Axis product supports several PTZ devices. Please see www.axis.com for a complete list of supported devices, and to obtain the correct driver. To install a PTZ device you need to install the PTZ driver.

To install the PTZ driver go to PTZ> Driver Selection. Browse to find the driver (e.g. driver.ptz) and Upload. If the driver was successfully uploaded, it appears in the Select driver to use drop-down list. From this drop-down list, select the driver to install or remove, and click Save.

Select Activate PTZ to enable PTZ. The address of the connected device appears against Device ID. Choose the Device type from the drop-down list. To find which device type to use, consult the documentation supplied by the PTZ driver.

To complete the installation go to System Options > Ports & Devices > COM Port (see COM Port) and verify the settings.

Control Queue

Note

•The administrator can enable and disable PTZ controls for selected users.

•To identify different users in the viewer group, cookies must be enabled on the client.

•The Control queue polltime is measured in seconds. For more information see the online help .

The administrator can set up a queue for PTZ controllers from PTZ > Control Queue. Once set up, the PTZ Control Queue buttons appear in the Live View page offering one viewer exclusive control for a limited period of time. Other users will be placed in queue.

A user who belongs to a group (see Users on page 49) with a higher PTZ priority can go before other users in the queue and take control of the product. The order of priority is as follows:

1.Administrator — An administrator takes over PTZ control regardless of who is first in queue. The administrator will be removed from the queue 60 seconds after the last PTZ control command.

2.Event — The Axis product can be configured to go to a preset position when triggered by an alarm (see Events on page 41). The event will immediately be placed first in the queue except when an administrator is in control.

3.Operator — Same as administrator but with lower priority

4.Guard Tour — A guard tour (see page 34) has PTZ control for an indefinite period of time. It may be overridden by an operator, event or administrator. The guard tour will resume when higher priority groups leave the queue.

5.Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passed on to the next viewer in queue.

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Axis Q1635 Fixed Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis Q1635 Fixed Network Camera Table of ContentsConnectors Performance Considerations Hardware Overview Power Connector Connectors and ButtonsNetwork Connector ConnectorLED Indicators Status LED Behavior for Focus Assistant Buzzer Signal for Focus AssistantReplace the Lens Access from the Internet Access the ProductAccess from a Browser Configure Capture Mode Set the Root PasswordSet Power Line Frequency PTZ ModeManual Trigger Go to Setup EventsControls on the Live View AMC Audio Controls Axis Media Control viewer toolbarPTZ Controls To show the manual trigger buttons in the Live ViewAxis Q1635 Fixed Network Camera Axis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsAdjust Focus Set Up the ProductBasic Setup Focus Assistant Image Set Up Video StreamsVideo and Audio Pixel Counter264 Click Save to apply the new settingsStream Profiles Camera SettingsCapture Mode Go to Setup Video & Audio Camera SettingsWhite Balance Image AppearanceImage Correction Set Shutter to Exposure SettingsWide Dynamic Range Shutter & GainView Area Iris configurationIris adjustment Image SettingsGo to Video & Audio View Area Select an Aspect ratio and a Video stream resolutionOverlay Overlay ImageClick Add to create a new rule Use Overlay Text in an Action RuleGo to Video & Audio Overlay Image Go to Events Action RulesAdvanced Privacy MaskFocus BasicAudio Input Set Up AudioAudio Modes Audio Output Audio ClipsBrowser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsFor more information about I/O ports, see I/O Ports on Go to Setup Live View ConfigUser Defined Links Output ButtonsAdvanced Preset PositionsPTZ Pan Tilt Zoom Guard TourControl Queue Install PTZ DriverOperator Same as administrator but with lower priority Motion Detection DetectorsCamera Tampering Shock DetectionMotion Detection Parameters Set Up Motion Detection Windows15% 60-90% 75-95% Default valuesAudio Detection Recommended valuesApplication Licenses Install ApplicationGo to Setup Applications ApplicationsAxis Q1635 Fixed Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents TriggersSystem Input SignalHardware StoragePTZ Control Add RecipientsActions Recipient TypesRecipient Use with action Set Up Email RecipientsGo to Events Schedules and click Add Set Up RecurrencesCreate Schedules To create a new scheduleGo to Recordings List RecordingsRecording List Continuous RecordingClick Save to save and start the recording Languages IP Address Filter System OptionsSecurity UsersGo to System Options Security Ieee IeeeCertificates Audio Support Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM Mount and Unmount SD Card StorageBonjour SD CardCOM Port Ports & DevicesNetwork Share PortsSee the online help MaintenancePort Status AccelerometerSupport Plain Config Reset to Factory Default SettingsCheck the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserSetup Video & Audio Camera Settings Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalPoor audio quality SettingsStorage and disk management problems No audioTechnical Specifications Audio output Function/group Specifications Audio Audio streamingSpecification Network Security Audio inputWeight Function/group SpecificationsPower ConnectorsPortuguese ConnectorsWarranty Function Pin SpecificationsLine out mono Ground Pin terminal block for power inputMm audio connectors stereo Tip Ring Sleeve Microphone/Line GroundFunction Pin RS485/422 ConnectorRX pair for all modes combined RX/TX for 2-wire RS485 Performance ConsiderationsM1.8
Related manuals
Manual 24 pages 60.17 Kb
Top Page Image Contents