Panasonic WV-NW470S, WV-NW474SE Prevention of Blooming and Smear, Specifications, Network Section

Page 32

PREVENTION OF BLOOMING AND SMEAR

When the camera is aimed at a bright light, such as a spotlight, or a surface that reflects bright light, smear or blooming may appear. Therefore, the camera should be operated carefully in the vicinity of extremely bright objects to avoid smear or blooming.

Smear

Bright object

Blooming

SPECIFICATIONS

Network Section

Image resolution

752x568, 752x280, 368x280, 176x136 pixel

Image process

JPEG (Super Fine/Fine/Normal/Low image quality selectable)

Image refreshing rate

Fast/Middle/Slow/Very Slow

Traffic control

32 kbps, 64 kbps, 128 kbps, 256 kbps, 512 kbps, 1 024 kbps, Unlimited

Protocols supported

TCP/IP, HTTP, FTP, SMTP, DNS, DDNS, DHCP, ARP, BOOTP, NTP

OS applicable

Windows 98 SE, Windows NT WORKSTATION 4.0 Service Pack6a, Windows

 

2000 Professional Service Pack2, Windows ME, or Windows XP

 

 

Applicable browsers

Internet Explorer 5.5, 5.5 SP2, 6.0, or Netscape Communicator 4.73, 4.78

Available number connections

16 browsers maximum

Camera Section

 

 

 

Pick-up Device:

753 (H) x582 (V) pixels, Interline Transfer CCD

 

 

Scanning Area:

4.8 (H) x 3.6 (V) mm (Equivalent to scanning area of 1/3" pick-up tube)

Scanning:

625 lines/50 fields/25 frames

Horizontal:

15.625 kHz

Vertical:

50.00 Hz

Synchronization:

Internal, Line-lock or multiplexed vertical drive (VD2) Sync selectable

Video Output:

1.0 V[P-P] PAL composite 75 Ω/BNC connector

Horizontal Resolution:

480 lines (C/L), 570 lines (B/W)

Signal-to-Noise Ratio:

50 dB (Equivalent to AGC Off, weight On, AP On)

Dynamic Range:

48 dB (Typ)

Minimum Illumination:

0.8 lx (0.08 footcandle) (WIDE) (C/L)

 

0.1 lx (0.01 footcandle) (WIDE) (B/W)

 

 

Gain Control:

ON (DNR-H), ON (DNR-L) or OFF (SET UP MENU) selectable

White Balance:

ATW1, ATW2 or AWC (SET UP MENU) selectable

Aperture:

Set Variable (SET UP MENU)

Super Dynamic2:

ON or OFF (SET UP MENU) selectable

Electronic Shutter Speed:

OFF, 1/120, 1/250, 1/500, 1/1 000,1/2 000, 1/4 000, 1/10 000 s selectable

Lens

 

Focal length:

3.8 mm - 8 mm

Maximum aperture ratio:

1:1.4 (Wide), 1:1.8 (Tele)

Angular field of view:

Horizontal: 35.6 ° - 73.6 °

 

Vertical: 26.6 ° - 53.4 °

Focusing range:

1.2 m - ∞ (3.9 ft - ∞)

 

 

Control Function:

Alarm In: Pulled-up to 5 V DC,

 

OFF (Open or 2 V DC – 12 V DC)/ ON (0 V 0.4 mA, ≥100 ms)

 

Alarm Out: Collector-output,

 

OFF (Open or 4 V DC – 5 V DC)/ ON (≤ 1 V 50 mA) Pulse/Latch selectable

 

 

-32-

Page 31 Page 33
Image 32
Page 31 Page 33
Contents WV-NW474SE Risk of Electric Shock Do not Open Contents Features PrefaceSystem Requirements TrademarksDocument Convention Precautions Handle the camera with careNever face the camera towards the sun Do not aim the camera at the same object for a long timeMajor Operating Controls & Their Functions 8DIP switch @3Control connector@4Power cable @2Video output connectorInstallation Installation Plans & PreparationsInstallation space ProcurementMounting the Camera Optional Heater UnitPower Connection Wire colours & functions AC TypeCable length and wire gauge 24 V AC Type ConnectionsImage Adjustment Control ConnectorVideo Output Connection Network Port ConnectionWaterproof Process Network Connection Types Direct Connection to PC TypeConnection to Intranet Type Connection to Internet TypeNetwork Setup of Your PC Preparations for Network ConnectionsNetwork Setup of the Camera Using Panasonic IP Setup SoftwareDhcp DNS DdnsPage Prior to Camera Setup Buttons Used for SetupCamera Setup Menus ALL Reset button¡From the Camera Setup Menu Tree Setting Procedures Setup SelectionCamera Setup Menu CAM Camera Identification Camera ID SettingLight Control Setting ALC Command UsageTo edit the Camera ID To replace a specific character in the Camera IDElectronic Sensitivity Enhancement Sens UP Gain Control Setting AGC on DNR-L, DNR-H/OFFShutter Speed Setting Shutter ATW1 Auto-Tracing White Balance Synchronization Setting SyncWhite Balance Setting White BAL Motion Detector Setting Motion DET Automatic White Balance Control Mode AWCManual Fine Adjustment for AWC ATW Push SWMenu/DIP SW Selection Special Menu SpecialTo reset to the factory settings Camera Reset 10-6. BWNetwork Setup Network Setup Http Port NumberInitializing the Setup Menu InitializingInitializing the Camera Menu Initializing Html FilesTroubleshooting Specifications TCP/IP, HTTP, FTP, SMTP, DNS, DDNS, DHCP, ARP, BOOTP, NTPPrevention of Blooming and Smear Network SectionStandard Accessories Optional AccessoriesGeneral WV-NW474SEAppendix Optional Heater Unit WV-CW3HE在日本印刷
Top Page Image Contents