Panasonic WV-NW470S 7Set button SET, 8DIP switch, 9Monitor output jack, @3Control connector

!7Set button (SET)

Validates the selection or opens a detailed menu.

!8DIP switch

Specifies certain settings shown in the figure. The default setting is marked with an asterisk *.

Note: The settings will be applied to the camera only when DIP SW, not MENU, is selected in the menu setup.

	1		2		3	4		5
	B/W		B/W	Aperture		Upside		Sync
	level					Down
ON	High* AUTO1				Soft		ON	LL
OFF	Low		OFF*	Sharp*		OFF*		INT*
		ON
		1	2	3	4	5

!9Monitor output jack

Connects to the LCD monitor and other devices with a 3.5 diam. 2-pole L-type plug for checking images.

@3Control connector

Connects respective devices. See Connections and Specifications for details.

Day/night in: Optical sensor

Alarm in: Door switch

Alarm out: Buzzer

AUX out: Illumination

GND: Signal ground

@4Power cable

Supplies power to the camera.

@5

@6 @7

@5Camera mounting bracket

@6Cable access hole

@7Sideway cable exit

@0

@1

@2

@3

@4

WV-NW474SE

@4

WV-NW470S

@0Dome cover

@1Network port

Connects to a PC or a network via a hub with a 10BASE-T/100BASETX cable.

@2Video output connector

Connects to the video input terminal of the monitor or recorder.

-8-