Panasonic WV-NW474SE, WV-NW470S Standard Accessories, Optional Accessories, General

Page 33

Control Function:	Auxiliary Out: Collector-output,
	OFF (Open or 4 V DC – 5 V DC)/ ON (≤ 1 V 50 mA)
	Day/Night In: Pulled-up to 5 V DC,
	OFF (Open) / ON (0 V 0.2 mA)

General

Power Source	24 V AC 50 Hz (WV-NW474SE), 220 V - 240 V AC 50 Hz (WV-NW470S)

Power Consumption:	24 V type:	8.6 W (Camera)
		12.1 W (Optional heater unit)
	220 V - 240 V type: 9.9 W (Camera)
		18.9 W (Camera & heater)

Ambient Operating Temperature:	–10 °C - +50 °C (14 °F - 122 °F)
	–30 °C - +50 °C (–22 °F – 122 °F) (when optional heater unit built in)

Ambient Operating Humidity:	Less than 90 %
Dimensions:	φ152.5 mm x 175 mm (H) [φ6" x 6-7/8" (H)]
Weights:	WV-NW470S	2 kg (4.4 lbs.) (Camera)
	WV-NW474SE	1.85 kg (4.1 lbs.) (Camera)
	Camera mounting bracket 0.5 kg (1.1 lbs.)

Weights and dimensions indicated are approximate.

Specifications are subject to change without notice.

STANDARD ACCESSORIES

CD-ROM (PDF Manual Contained)	1 pc.
Operating Instructions (This document)	1 pc.
The following are for installation.
Camera mounting bracket	1 pc.
Camera mounting screw	3 pcs.
Tamperproof screw bit	1 pc.
RJ-45 female-female conversion connector*	1 pc.
Label for MAC address	1 pc.
Control cable adapter(5-pin)*	1 pc.
*Attached to the cable when shipped.

OPTIONAL ACCESSORIES

WV-CW3HE Heater unit

-33-

Image 33

Contents WV-NW474SE Risk of Electric Shock Do not Open Contents Preface FeaturesSystem Requirements TrademarksDocument Convention Handle the camera with care PrecautionsNever face the camera towards the sun Do not aim the camera at the same object for a long timeMajor Operating Controls & Their Functions @3Control connector 8DIP switch@4Power cable @2Video output connectorInstallation Plans & Preparations InstallationInstallation space ProcurementOptional Heater Unit Mounting the CameraWire colours & functions AC Type Power ConnectionCable length and wire gauge 24 V AC Type ConnectionsControl Connector Image AdjustmentVideo Output Connection Network Port ConnectionWaterproof Process Direct Connection to PC Type Network Connection TypesConnection to Intranet Type Connection to Internet TypePreparations for Network Connections Network Setup of Your PCUsing Panasonic IP Setup Software Network Setup of the CameraDdns Dhcp DNSPage Buttons Used for Setup Prior to Camera SetupCamera Setup Menus ALL Reset button¡From the Camera Setup Menu Tree Setup Selection Setting ProceduresCamera Setup Menu CAM Camera Identification Camera ID SettingCommand Usage Light Control Setting ALCTo edit the Camera ID To replace a specific character in the Camera IDGain Control Setting AGC on DNR-L, DNR-H/OFF Shutter Speed Setting ShutterElectronic Sensitivity Enhancement Sens UP Synchronization Setting Sync White Balance Setting White BALATW1 Auto-Tracing White Balance Automatic White Balance Control Mode AWC Motion Detector Setting Motion DETManual Fine Adjustment for AWC ATW Push SWSpecial Menu Special Menu/DIP SW Selection10-6. BW To reset to the factory settings Camera ResetHttp Port Number Network Setup Network SetupInitializing Initializing the Setup MenuInitializing the Camera Menu Initializing Html FilesTroubleshooting TCP/IP, HTTP, FTP, SMTP, DNS, DDNS, DHCP, ARP, BOOTP, NTP SpecificationsPrevention of Blooming and Smear Network SectionOptional Accessories Standard AccessoriesGeneral WV-NW474SEOptional Heater Unit WV-CW3HE Appendix在日本印刷