Panasonic WV-CW864A operating instructions New Password, Password Verification

●Password Lock (PASSWORD LOCK)

Caution: For security, do not operate your VCR for recording while the password menus are displayed on the monitor.

A 3-digit number is used for a password to limit access to all settings.

1.Move the cursor to PASSWORD LOCK, then select ON or OFF with the joystick.

** SET UP MENU **

PRESET 1 MAP

HOME POSITION OFF

SELF RETURN OFF

AUTO MODE OFF AUTO PAN KEY AUTO PAN DIGITAL FLIP ON SPECIAL1

CAMERA RS485 SET UP

PASSWORD LOCK OFF

3-5 To return to the SET UP MENU menu without ver- ifying the password, move the cursor to RET, and press the CAM (SET) key.

New Password

4.To change the password in step 3-3 above, move the cursor from OK to NEW PASSWORD, then press the CAM (SET) key. NEW PASSWORD menu appears.

** NEW PASSWORD? **

0 1 2 3 4 5 6 7 8 9

. . .

↑

. . .

OK RESET

RET

** PASSWORD? ** 0 1 2 3 4 5 6 7 8 9

. . .

↑

OK RESET

NEW PASSWORD

RET

Note: ON or OFF can be selected only after going through the password verification.

OFF: You can change all settings.

ON: You cannot change settings at all nor operate AUTO PAN, SEQ, SORT, and PATROL.

2. Press the CAM (SET) key.

Password Verification

3. The password verification menu appears.

3-1 Select a numeral for the first digit with the joy- stick, and press the CAM (SET) key. Though the entered password is not displayed, the up-arrow moves one character to the right.

3-2 Repeat the above step for the 2nd and 3rd dig- its.

Default: 123

3-3 The cursor moves to OK after all the three digits have been entered. Unless you want to change the password, press the CAM (SET) key.

If the correct password is entered, the screen returns to SET UP MENU. ON and OFF settings are the same as made on the SET UP MENU menu is as set in step 1.

If a wrong password is entered, the screen returns to the verification menu. Repeat steps 3-1 to 3-3 to verify the password.

3-4 To cancel an incomplete password, move the cursor to RESET, and press the CAM (SET) key. The screen returns to the verification menu.

-26-

Note: The NEW PASSWORD menu is accessible only after the verification has been completed.

The up-arrow mark appears indicating the first digit on the first line.

4-1 Enter a new three-digit password in the same way as in steps 3-1 to 3-2.

4-2 The cursor moves to OK after all the three digits have been entered. Press the CAM (SET) key to move the cursor to the first digit on the second line.

4-3 Enter the same password as the one you have entered on the first line.

4-4 The cursor moves to OK. Press the CAM (SET) key. If the new password is successfully entered, the screen returns to SET UP MENU.

4-5 Retry steps 4-1 to 4-4. If the first entry for the password is different from the second one, the screen returns to the NEW PASSWORD? menu.

4-6 To return to the SET UP MENU menu without changing the password, move the cursor to RET, and press the CAM (SET) key.