Panasonic WV-CS854B operating instructions Setup Menu Description

Page 13

■Setup Menu Description

● Presetting

(1)Position (POSITION SET)

Aligns the camera position and focal point by panning, tilting, zooming and focusing.

See page 18 for the setting.

(2)Preset Identification (PRESET ID)

Assigns the name for preset IDs (identification of up to 16 alphanumeric characters) and can be switched on or off on the monitor screen.

See page 20 for the setting.

(3)Light Control (ALC/MANUAL)

Selects the ALC or MANUAL mode for adjusting the lens iris.

See page 21 for the setting.

(4)Dwell Time (DWELL TIME)

Displays the picture at each camera position for the selected duration.

You can select a preset duration from the menu. See page 21 for the setting.

(5)Scene File (SCENE FILE) Stores up to 10 files.

Each file has a set of detailed parameters for the shutter speed, AGC, electronic sensitivity enhancement, white balance, motion detector and AF mode. The scene files can be recalled later to reproduce the parameter settings under the same conditions as stored in the files.

See page 21 for the setting.

●Home Position (HOME POSITION)

The home position is the camera’s basic position.

The camera returns to this position automatically after a specific time following a manual operation. This setting functions only when AUTO MODE is OFF.

See page 23 for the setting.

SQ: Starts the sequence function.

SR: Starts the sort function.

PT: Starts the patrol function.

See page 23 for the setting.

●Auto Mode (AUTO MODE)

The auto mode is used for setting the movement of the camera.

You can select one of four automatic operation modes and one manual operation mode as follows:

OFF: No automatic operation. The camera can be operated only manually.

SEQ: The camera operates in the sequence of preset positions in numerical order.

SORT: The camera operates in the sequence of preset positions counterclockwise from pan starting point.

AUTO PAN: The camera automatically turns within the preset panning range.

PATROL: The camera operates in the patrol-learn function.

See page 30 for the setting.

●Auto Pan Key (AUTO PAN KEY)

This setting assigns the SEQ, SORT, AUTO PAN or PATROL (PLAY) mode to the AUTO key on the controller.

After this setting, the AUTO key performs as assigned. Note: The AUTO PAN LED on the controller does not light if a mode other than AUTO PAN is assigned.

●Digital Flip (DIGITAL FLIP)

Tilt range is limited within –5 ° to 90 ° if OFF is selected. If ON is selected it widens the range up to 190 ° with the digital flip that reverses horizontal and vertical scanning when the camera is tilted beyond 90 ° point (Downright position if the camera is installed on a ceiling). Tilt range narrows from –5 ° to 90 ° if PAN LIMIT is set to ON.

●Self Return (SELF RETURN)

The self return function allows the camera to resume one of the operations described below after specified time.

This function automatically works after a lapse of setting time from manual operation finished.

OFF: Cancels the auto mode (SEQ, SORT, AUTO PAN and PATROL).

AT (the auto mode is set to OFF): Shifts the

camera direction to the home position.

AT (the auto mode is set to other than OFF):

Activates the auto mode.

HP: Shifts the camera direction to the home position.

AP: Starts the auto pan function.

-13-

●Password Lock (PASSWORD LOCK)

This menu limits setting changes.

●Special 1 Menu

(1)Privacy Zone (PRIVACY ZONE)

This setting is used for masking unwanted zones, hiding them from display on the monitor screen.

Up to 8 zones can be registered. Submenus are provided for zone number selection and parameter setting. See page 27 for details.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Color Cctv Camera English Version English Important Safety InstructionsPage Contents Preface FeaturesDigital Flip Operation Camera Cleaning PrecautionsPreset Data Uploading or Down Loading Do not aim the camera at the same object for a long time ConsumablesSelf-diagnosis Function Prevention of blooming and smearConstruction Setup Menu SetupAUTO/ON/OFF P MON ESC CAM SET Preset IDWV-CU161C WV-RM70 Prog SWSetup Menu Description Camera Gain Control AGC Shutter Speed ShutterSynchronization Sync Important NoticesRS485 Communication Auto Focus AF Mode10Special 2 Menu SPECIAL2 11Self-diagnosis FunctionSetup Menu Display Setting ProceduresMenu Display Submenu DisplayPreset Menu Display Preset MenuPosition Setting Position SET To Set Panning/Tilting PositionsTo Set the Lens Zoom and Focus Positions Pan OffsetPreset Identification Setting Preset ID Scene File Setting Scene File Light Control Setting ALC/MANUALTo Return to the Preset Setting Menu Dwell Time Dwell TimePreset Speed Setting Preset Speed Deleting Preset PositionsTo Return to the Preset Number Set Menu To Return to the Setup MenuSelf Return Setting Self Home Position Setting HomeAuto Mode Selection Auto OFF SEQ Sort Auto PAN PatrolZoom →PUSH SET RET Digital Flip Setting Digital Flip Auto Pan Key Setting Auto PAN KEYSEQ Sort Patrol Password Verification New PasswordPrivacy Zone Privacy Zone Special 1 Menu Setting SpecialProportional Pan/Tilt PROPO. P/T Settings for on NeswArea Title Area Title Zoom ratioArea Title Editing Setting for on UserTo Quit Editing Patrol-learn and Patrol Play PatrolPatrol Learn with a Controller Having Patrol Key PAN/TILT/ZOOM/FOCUS Iris Shutter AGC Sens UP White BalancePatrol Play with a Controller Having the Patrol Key Alarm Input/Output Alarm IN/OUTPatrol Play with a Controller not Having the Patrol Key Patrol Play with the Auto PAN KeyElectronic Zoom EL-ZOOM Cleaning CleaningCNT-CLS 1, 2 Output Image Hold Image Hold Preset Alarm Preset ALMTilt Angle Tilt Angle 0 /5 To Display the Camera Setting Menu Camera SettingCamera Identification Camera ID ALC Mode with SUPER-D2 on Gain Control AGC on LOW/ MID/ HIGH/OFF Shutter Speed Setting ShutterElectronic Sensitivity Enhancement Sens UP Synchronization Sync Line-lock Sync Mode LLAutomatic White Balance Control Mode AWC Auto-Tracing White Balance Mode ATW1/ ATW2White Balance White BAL Motion Detector Motion DET Resolution Resolution Auto Focus Setting AF ModeSpecial 2 Menu SPECIAL2 Auto S Auto M Auto L Manual L Manual M Manual SBW Setting Black and White Mode BW ModePIX Sens UP Setting Burst BW SettingCamera Resetting Camera Reset PIX OFF Setting PIX OFFTo Restore the Camera Default Position Refresh Reset to the Factory Default SettingsInitial Camera Communication Parameters RS485 SetupChanging the Camera Communication Parameters Menu Setting Factory Default SettingPreset Menu Preset ID ALC/MANUAL SUPER-D2 OFF Dwell Time CNT-CLS OFF Coax ALM OUTSetting the Switches InstallationPrecautions RS485 Parameter SetupUnit Number For Panasonic’s ProtocolUnit Assemble the Camera RS485 SettingSideway Cable Exit Hook the fall prevention wire on the camera mounting base How to Assemble the Cable with the Accessory Connector Accessory Connector InformationConnect this to 24 V AC Class 2 Power Supply only ConnectionsAlarm OUT Connections Alarm in ConnectionsRS485 Connection OUTSystem Connections WV-CS854B SpecificationsOptional Accessories AccessoriesWV-CS2SH Shortcuts AppendixImprimé au Japon
Top Page Image Contents