Panasonic WV-CS854B Light Control Setting ALC/MANUAL, ALC Mode with SUPER-D2 on

Page 35

●Light Control Setting (ALC/MANUAL)

1.Move the cursor to ALC/MANUAL and select ALC or MANUAL with the joystick. When you select ALC, set backlight compensation.

** SET UP **

CAMERA ID		OFF
ALC/MANUAL		ALC
SHUTTER		AUTO
AGC		ON(MID)
SENS UP		OFF
SYNC		INT
WHITE BAL		ATW1
MOTION DET		OFF
AF MODE		AUTO L
RET	SPECIAL2

(2) ALC Mode with SUPER-D2 OFF

1.Move the cursor to SUPER-D2 and select OFF. (When you select MANUAL, SUPER-D2 is not available.) MASK SET appears on the menu.

Blinking

Note: The backlight compensation submenu associated with this menu is described separately and should be set up after installing the camera at the site and observing the actual site picture.

2.When MANUAL is selected, quit the setup menu by pressing the MON (ESC) key. Press the OPEN or CLOSE key on the controller for iris adjustment.

(1) ALC Mode with SUPER-D2 ON

1.Press the CAM (SET) key after selecting ALC. The ALC CONT menu appears.

** ALC CONT **

BACK LIGHT COMP

SUPER-D2	OFF
MASK SET
LEVEL	••••••••
	-	+

RET

2.Move the cursor to the SUPER-D2 parameter and select ON.

** ALC CONT **

BACK LIGHT COMP

SUPER-D2	ON
LEVEL	••••••••
	-	+

RET

3.If you want to adjust the video output level, move the "I" cursor for LEVEL. Adjust it to the desired level with the joystick.

4.Move the cursor to RET and press the CAM (SET) key to return to the CAM SET UP menu. To return to the camera picture, press the F4 button.

2.Move the cursor to MASK SET and press the CAM (SET) key. The 48 mask areas appear on the monitor screen. The cursor is blinking in the top left corner of the screen.

Blinking

3.To mask an area where backlight is bright, move the cursor to the area and press the CAM (SET) key. The mask turns white. Repeat this procedure to mask the desired areas.

Turns to white

Blinking

4.To cancel a masked area, move the cursor to the area, and press the CAM (SET) key. To cancel all masking areas, press the F2 button of WV-CU550C. For WV-RM70, press the right and left switches simultaneously.

5.After masking is completed, press the MON (ESC) key. The 48 mask areas on the monitor screen disappear and the ALC CONT menu appears.

-35-

Image 35

Contents Color Cctv Camera English Version English Important Safety InstructionsPage Contents Digital Flip Operation FeaturesPreface Preset Data Uploading or Down Loading PrecautionsCamera Cleaning Prevention of blooming and smear ConsumablesDo not aim the camera at the same object for a long time Self-diagnosis FunctionConstruction Setup Menu SetupAUTO/ON/OFF P Prog SW Preset IDMON ESC CAM SET WV-CU161C WV-RM70Setup Menu Description Camera Important Notices Shutter Speed ShutterGain Control AGC Synchronization Sync11Self-diagnosis Function Auto Focus AF ModeRS485 Communication 10Special 2 Menu SPECIAL2Submenu Display Setting ProceduresSetup Menu Display Menu DisplayTo Set Panning/Tilting Positions Preset MenuPreset Menu Display Position Setting Position SETTo Set the Lens Zoom and Focus Positions Pan OffsetPreset Identification Setting Preset ID Dwell Time Dwell Time Light Control Setting ALC/MANUALScene File Setting Scene File To Return to the Preset Setting MenuTo Return to the Setup Menu Deleting Preset PositionsPreset Speed Setting Preset Speed To Return to the Preset Number Set MenuOFF SEQ Sort Auto PAN Patrol Home Position Setting HomeSelf Return Setting Self Auto Mode Selection AutoZoom →PUSH SET RET SEQ Sort Patrol Auto Pan Key Setting Auto PAN KEYDigital Flip Setting Digital Flip Password Verification New PasswordPrivacy Zone Privacy Zone Special 1 Menu Setting SpecialZoom ratio Settings for on NeswProportional Pan/Tilt PROPO. P/T Area Title Area TitleArea Title Editing Setting for on UserPAN/TILT/ZOOM/FOCUS Iris Shutter AGC Sens UP White Balance Patrol-learn and Patrol Play PatrolTo Quit Editing Patrol Learn with a Controller Having Patrol KeyPatrol Play with the Auto PAN Key Alarm Input/Output Alarm IN/OUTPatrol Play with a Controller Having the Patrol Key Patrol Play with a Controller not Having the Patrol KeyCNT-CLS 1, 2 Output Cleaning CleaningElectronic Zoom EL-ZOOM Tilt Angle Tilt Angle 0 /5 Preset Alarm Preset ALMImage Hold Image Hold Camera Identification Camera ID Camera SettingTo Display the Camera Setting Menu ALC Mode with SUPER-D2 on Electronic Sensitivity Enhancement Sens UP Shutter Speed Setting ShutterGain Control AGC on LOW/ MID/ HIGH/OFF Synchronization Sync Line-lock Sync Mode LLWhite Balance White BAL Auto-Tracing White Balance Mode ATW1/ ATW2Automatic White Balance Control Mode AWC Motion Detector Motion DET Auto S Auto M Auto L Manual L Manual M Manual S Auto Focus Setting AF ModeResolution Resolution Special 2 Menu SPECIAL2Burst BW Setting Black and White Mode BW ModeBW Setting PIX Sens UP SettingReset to the Factory Default Settings PIX OFF Setting PIX OFFCamera Resetting Camera Reset To Restore the Camera Default Position RefreshChanging the Camera Communication Parameters RS485 SetupInitial Camera Communication Parameters CNT-CLS OFF Coax ALM OUT Factory Default SettingMenu Setting Preset Menu Preset ID ALC/MANUAL SUPER-D2 OFF Dwell TimeRS485 Parameter Setup InstallationSetting the Switches PrecautionsUnit Number For Panasonic’s ProtocolUnit Sideway Cable Exit RS485 SettingAssemble the Camera Hook the fall prevention wire on the camera mounting base Connections Accessory Connector InformationHow to Assemble the Cable with the Accessory Connector Connect this to 24 V AC Class 2 Power Supply onlyOUT Alarm in ConnectionsAlarm OUT Connections RS485 ConnectionSystem Connections WV-CS854B SpecificationsWV-CS2SH AccessoriesOptional Accessories Shortcuts AppendixImprimé au Japon