Panasonic WV-CS854B operating instructions Patrol-learn and Patrol Play Patrol, To Quit Editing

Page 30

To Quit Editing

•To return to the AREA TITLE menu, move the cursor to RET, and press the CAM (SET) key.

•To cancel one area title, move the cursor to RESET in the AREA TITLE menu, and press the CAM (SET) key.

•To return to the SPECIAL 1 menu, move the cursor to RET, and press the CAM (SET) key.

•To erase all the area titles, move the cursor to RESET in the AREA TITLE (USER) selection menu, and press the CAM (SET) key.

FLOOR 1

NORTH

Notes:

•An area title appears under the camera ID if both are set in the same position. If the setting is different, they appear in the area title position.

•In case of sharing a common subject in a scene of other camera number, the nearest area title appears while the camera direction deviates within 45 ° from the set position. If two or more area numbers are set in the same position, the title of the highest number appears.

•IMAGE HOLD

•AREA TITLE

•DIGITAL FLIP

•PRIVACY ZONE

•CAMERA ID

•PROPO.PT

•PAN LIMIT

•ZOOM LIMIT

•TILT ANGLE

•BURST

•CLEANING

After starting the patrol-learn, the following manual operations are stored.

•PAN/TILT/ZOOM/FOCUS operation

•IRIS operation

•Preset positioning

2.Open the SET UP menu and move the cursor to SPECIAL 1. For PATROL, select LEARN, PLAY or STOP with the joystick.

The factory default setting is STOP.

LEARN: A series of manual operations is stored.

PLAY: Stored operations are reproduced.

STOP: LEARN or PLAY is not activated.

PATROL LEARN with a Controller Having PATROL Key

1.Press the PATROL key and the CAM (SET) key simultaneously to start patrol-learn. The setup menu displays "LEARNING(60S)", and the starting points are stored.

●Patrol-learn and Patrol Play (PATROL)

A routine of manual operations can be stored for 1 minute at the maximum and reproduced repetitively.

PATROL

** SPECIAL

1 **

 

PRIVACY ZONE

OFF

PROPO.P/T

ON

AREA TITLE

ON(USER)

PATROL

 

PLAY

 

ALARM IN/OUT

 

 

 

CLEANING

OFF

EL-ZOOM

ON

PRESET ALM

OFF

IMAGE HOLD

OFF

TILT ANGLE

0°

 

RET

 

 

 

1.Set the following parameters for the patrol-learn starting position. These parameters are stored when the patrol-learn mode starts.

•PAN/TILT/ZOOM/FOCUS

•IRIS

•SHUTTER

•AGC

•SENS UP

•WHITE BALANCE

LEARNING(60S)

2.Operate patrol-learn manually. The operation data is stored. The countdown to complete learning is displayed.

3.To stop patrol-learn, press the PATROL STOP key.

Patrol-learn with a Controller not Having the PATROL Key

1.Close the SET UP or SPECIAL 1 menu to start PATROL LEARN. Starting point parameters are stored and "LEARNING(60S)" is displayed on the monitor.

2.Operate patrol-learn manually.

-30-

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Color Cctv Camera English Version Important Safety Instructions EnglishPage Contents Features PrefaceDigital Flip Operation Precautions Camera CleaningPreset Data Uploading or Down Loading Self-diagnosis Function ConsumablesDo not aim the camera at the same object for a long time Prevention of blooming and smearConstruction Setup Setup MenuAUTO/ON/OFF P WV-CU161C WV-RM70 Preset IDMON ESC CAM SET Prog SWSetup Menu Description Camera Synchronization Sync Shutter Speed ShutterGain Control AGC Important Notices10Special 2 Menu SPECIAL2 Auto Focus AF ModeRS485 Communication 11Self-diagnosis FunctionMenu Display Setting ProceduresSetup Menu Display Submenu DisplayPosition Setting Position SET Preset MenuPreset Menu Display To Set Panning/Tilting PositionsPan Offset To Set the Lens Zoom and Focus PositionsPreset Identification Setting Preset ID To Return to the Preset Setting Menu Light Control Setting ALC/MANUALScene File Setting Scene File Dwell Time Dwell TimeTo Return to the Preset Number Set Menu Deleting Preset PositionsPreset Speed Setting Preset Speed To Return to the Setup MenuAuto Mode Selection Auto Home Position Setting HomeSelf Return Setting Self OFF SEQ Sort Auto PAN PatrolZoom →PUSH SET RET Auto Pan Key Setting Auto PAN KEY Digital Flip Setting Digital FlipSEQ Sort Patrol New Password Password VerificationSpecial 1 Menu Setting Special Privacy Zone Privacy ZoneArea Title Area Title Settings for on NeswProportional Pan/Tilt PROPO. P/T Zoom ratioSetting for on User Area Title EditingPatrol Learn with a Controller Having Patrol Key Patrol-learn and Patrol Play PatrolTo Quit Editing PAN/TILT/ZOOM/FOCUS Iris Shutter AGC Sens UP White BalancePatrol Play with a Controller not Having the Patrol Key Alarm Input/Output Alarm IN/OUTPatrol Play with a Controller Having the Patrol Key Patrol Play with the Auto PAN KeyCleaning Cleaning Electronic Zoom EL-ZOOMCNT-CLS 1, 2 Output Preset Alarm Preset ALM Image Hold Image HoldTilt Angle Tilt Angle 0 /5 Camera Setting To Display the Camera Setting MenuCamera Identification Camera ID ALC Mode with SUPER-D2 on Shutter Speed Setting Shutter Gain Control AGC on LOW/ MID/ HIGH/OFFElectronic Sensitivity Enhancement Sens UP Line-lock Sync Mode LL Synchronization SyncAuto-Tracing White Balance Mode ATW1/ ATW2 Automatic White Balance Control Mode AWCWhite Balance White BAL Motion Detector Motion DET Special 2 Menu SPECIAL2 Auto Focus Setting AF ModeResolution Resolution Auto S Auto M Auto L Manual L Manual M Manual SPIX Sens UP Setting Black and White Mode BW ModeBW Setting Burst BW SettingTo Restore the Camera Default Position Refresh PIX OFF Setting PIX OFFCamera Resetting Camera Reset Reset to the Factory Default SettingsRS485 Setup Initial Camera Communication ParametersChanging the Camera Communication Parameters Preset Menu Preset ID ALC/MANUAL SUPER-D2 OFF Dwell Time Factory Default SettingMenu Setting CNT-CLS OFF Coax ALM OUTPrecautions InstallationSetting the Switches RS485 Parameter SetupFor Panasonic’s Protocol Unit NumberUnit RS485 Setting Assemble the CameraSideway Cable Exit Hook the fall prevention wire on the camera mounting base Connect this to 24 V AC Class 2 Power Supply only Accessory Connector InformationHow to Assemble the Cable with the Accessory Connector ConnectionsRS485 Connection Alarm in ConnectionsAlarm OUT Connections OUTSystem Connections Specifications WV-CS854BAccessories Optional AccessoriesWV-CS2SH Appendix ShortcutsImprimé au Japon
Top Page Image Contents