Panasonic WV-CS854B Alarm Input/Output Alarm IN/OUT, Patrol Play with the Auto PAN Key

Page 31

3.Open the SET UP menu to stop learning.

Notes:

•It is recommended to set PAN LIMIT to ON for patrol-learn. Otherwise PAN LIMIT is invalid in playback.

•If the power fails in the patrol-learn mode, start the patrol-learn function again from the starting point.

•LEARN also stops 1 minute after starting if the memory is full.

•Auto refreshing may be activated in the patrol play mode or the auto mode to calibrate the lens position.

Patrol Play with a Controller Having the PATROL Key

1.Press the PATROL PLAY key. The camera turns to the starting point and reproduces the operations stored in the memory. Iris operation is valid only in the playback mode.

2.Press the PATROL STOP key and PROGRAM key simultaneously to stop playback or press any

manual operation key (e.g., PAN/TILT/ ZOOM/FOCUS) except the iris keys.

Patrol Play with a Controller not Having the PATROL Key

1.Select patrol play in the setup menu, and then close the menu. The camera turns to the starting point and the operations stored in memory are reproduced. Iris operation is valid only in the playback mode.

2.Open the SET UP menu, or press any of manual operation keys (e.g., PAN/TILT/ ZOOM/FOCUS) except the iris keys to stop playback.

Patrol Play with the AUTO PAN Key

1.If the PATROL PLAY function is assigned to the AUTO PAN key, press the AUTO PAN key to turn the camera back to the starting point and to reproduce the operation data stored in the memory.

2.To stop playback, press the PATROL STOP key or any manual operation key (e.g., PAN/ TILT/ ZOOM/ FOCUS) except the iris keys.

Notes:

•In the patrol play mode, the camera movement may occasionally deviate from the entered routine when the routine includes a move to a preset position. If this happens, re-enter the routine of manual operations for patrol-learn.

•In the patrol play mode, black and white automatic switching does not work.

•In the patrol play mode, when the power of the controller is turned on or off, the patrol play stops. In this case, press the PATROL PLAY key again. (If SELF RETURN is set to ON, the patrol play will start again after elapsing the setting return time.)

●Alarm Input/Output (ALARM IN/OUT)

Move the cursor to ALARM IN/OUT, and press the CAM (SET) key. The ALARM IN/OUT submenu appears.

** SPECIAL

1 **

PRIVACY ZONE

OFF

PROPO.P/T

ON

AREA TITLE

ON(USER)

PATROL

STOP

ALARM IN/OUT

 

 

 

CLEANING

OFF

EL-ZOOM

ON

PRESET ALM

OFF

IMAGE HOLD

OFF

TILT ANGLE

0°

RET

 

 

 

Note: While the camera is in the AF mode or the lens moves between WIDE and TELE, alarm input may be ignored if several alarm inputs are received in succession.

ALARM IN 1-4

Alarm input signals are supplied from external devices through the ALARM IN connector to turn the camera to a preset position.

1.Move the cursor to ALARM IN 1* and select a preset position or OFF with the joystick, then press the CAM (SET) key.

The factory default setting is OFF.

**

ALARM IN/OUT **

ALARM

IN

1

OFF

ALARM

IN

2

OFF

ALARM

IN

3

OFF

ALARM

IN

4

OFF

CNT-CLS 1

 

OFF

TIME

OUT

 

100MS

CNT-CLS 2

 

OFF

COAX ALM

OUT

OFF

RET

*Set ALARM IN 2, 3 and 4 in the same way as ALARM IN 1.

1POSI, 2 POSI, 3 POSI and 4 POSI: Preset position. If an alarm input is received, the camera turns to a preset position, and sends an alarm output signal. The position number corresponds to the alarm input number (1-1,2-2,3-3 and 4-4).

B/W: Available for ALARM INPUT 4 only. The camera changes its mode from color to black and white if ALARM IN 4 is supplied.

OFF: The camera ignores alarm inputs.

-31-

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Color Cctv Camera English Version English Important Safety InstructionsPage Contents Preface FeaturesDigital Flip Operation Camera Cleaning PrecautionsPreset Data Uploading or Down Loading Prevention of blooming and smear ConsumablesDo not aim the camera at the same object for a long time Self-diagnosis FunctionConstruction Setup Menu SetupAUTO/ON/OFF P Prog SW Preset IDMON ESC CAM SET WV-CU161C WV-RM70Setup Menu Description Camera Important Notices Shutter Speed ShutterGain Control AGC Synchronization Sync11Self-diagnosis Function Auto Focus AF ModeRS485 Communication 10Special 2 Menu SPECIAL2Submenu Display Setting ProceduresSetup Menu Display Menu DisplayTo Set Panning/Tilting Positions Preset MenuPreset Menu Display Position Setting Position SETTo Set the Lens Zoom and Focus Positions Pan OffsetPreset Identification Setting Preset ID Dwell Time Dwell Time Light Control Setting ALC/MANUALScene File Setting Scene File To Return to the Preset Setting MenuTo Return to the Setup Menu Deleting Preset PositionsPreset Speed Setting Preset Speed To Return to the Preset Number Set MenuOFF SEQ Sort Auto PAN Patrol Home Position Setting HomeSelf Return Setting Self Auto Mode Selection AutoZoom →PUSH SET RET Digital Flip Setting Digital Flip Auto Pan Key Setting Auto PAN KEYSEQ Sort Patrol Password Verification New PasswordPrivacy Zone Privacy Zone Special 1 Menu Setting SpecialZoom ratio Settings for on NeswProportional Pan/Tilt PROPO. P/T Area Title Area TitleArea Title Editing Setting for on UserPAN/TILT/ZOOM/FOCUS Iris Shutter AGC Sens UP White Balance Patrol-learn and Patrol Play PatrolTo Quit Editing Patrol Learn with a Controller Having Patrol KeyPatrol Play with the Auto PAN Key Alarm Input/Output Alarm IN/OUTPatrol Play with a Controller Having the Patrol Key Patrol Play with a Controller not Having the Patrol KeyElectronic Zoom EL-ZOOM Cleaning CleaningCNT-CLS 1, 2 Output Image Hold Image Hold Preset Alarm Preset ALMTilt Angle Tilt Angle 0 /5 To Display the Camera Setting Menu Camera SettingCamera Identification Camera ID ALC Mode with SUPER-D2 on Gain Control AGC on LOW/ MID/ HIGH/OFF Shutter Speed Setting ShutterElectronic Sensitivity Enhancement Sens UP Synchronization Sync Line-lock Sync Mode LLAutomatic White Balance Control Mode AWC Auto-Tracing White Balance Mode ATW1/ ATW2White Balance White BAL Motion Detector Motion DET Auto S Auto M Auto L Manual L Manual M Manual S Auto Focus Setting AF ModeResolution Resolution Special 2 Menu SPECIAL2Burst BW Setting Black and White Mode BW ModeBW Setting PIX Sens UP SettingReset to the Factory Default Settings PIX OFF Setting PIX OFFCamera Resetting Camera Reset To Restore the Camera Default Position RefreshInitial Camera Communication Parameters RS485 SetupChanging the Camera Communication Parameters CNT-CLS OFF Coax ALM OUT Factory Default SettingMenu Setting Preset Menu Preset ID ALC/MANUAL SUPER-D2 OFF Dwell TimeRS485 Parameter Setup InstallationSetting the Switches PrecautionsUnit Number For Panasonic’s ProtocolUnit Assemble the Camera RS485 SettingSideway Cable Exit Hook the fall prevention wire on the camera mounting base Connections Accessory Connector InformationHow to Assemble the Cable with the Accessory Connector Connect this to 24 V AC Class 2 Power Supply onlyOUT Alarm in ConnectionsAlarm OUT Connections RS485 ConnectionSystem Connections WV-CS854B SpecificationsOptional Accessories AccessoriesWV-CS2SH Shortcuts AppendixImprimé au Japon
Top Page Image Contents