Panasonic WV-CS854B Consumables, Do not aim the camera at the same object for a long time

Page 8

9.Do not operate the camera beyond the specified temperature, humidity or power source ratings. Do not use the camera in an extreme environment where high temperature or high humidity exists. Do not place the camera near heat sources such as radiators, stoves or other units that produce heat. Use the camera under conditions where temperature is between –10 °C - +50 °C (14 °F - 122 °F), preferably +40 °C (104 °F)], and humidity is below 90 %.

The input power source is 24 V AC 60 Hz.

10.Do not install the camera near the air outlet of an air conditioner.

The lens may become cloudy due to condensation if the camera is used under the following

conditions.

•Rapid temperature fluctuations by switching the air conditioner on and off.

•Rapid temperature fluctuations due to frequent door opening and closing.

•Use in an environment where eyeglasses become foggy.

•Use in a room filled with cigarette smoke or dust.

If the lens becomes cloudy due to condensation, remove the dome cover and wipe all moist surfaces with a soft cloth.

11.Consumables

Parts having contacts such as the lens-drive motors, cooling fan motor and slip-rings inside the camera are subject to wear with time. Please ask the nearest service center about replacement and maintenance of such parts.

12.Do not aim the camera at the same object for a long time.

Burn-in of an image may be caused on the fluorescent screen of CRT.

13.Self-diagnosis Function

If the camera continues operating abnormally for 30 seconds or more due to such an accident as external noise, the camera will automatically reset its power. In the case it happens frequently, check if there would be any environmental cause.

14.Prevention of blooming and smear

When the camera is aimed at a bright light source, such as a spotlight, or a surface that reflects bright light, smear or blooming may appear. Therefore, the camera should be operated carefully in the vicinity of extremely bright objects to avoid smear or blooming.

Smear

Bright object

*Matsushita Electric Industrial Co., Ltd. herewith declares that it will not be liable for any damage, whether direct or indirect, caused by using the product for business transaction or security, or malfunctioning of this product

-8-

Image 8

Contents Color Cctv Camera English Version Important Safety Instructions EnglishPage Contents Digital Flip Operation FeaturesPreface Preset Data Uploading or Down Loading PrecautionsCamera Cleaning Consumables Do not aim the camera at the same object for a long timeSelf-diagnosis Function Prevention of blooming and smearConstruction Setup Setup MenuAUTO/ON/OFF P Preset ID MON ESC CAM SETWV-CU161C WV-RM70 Prog SWSetup Menu Description Camera Shutter Speed Shutter Gain Control AGCSynchronization Sync Important NoticesAuto Focus AF Mode RS485 Communication10Special 2 Menu SPECIAL2 11Self-diagnosis FunctionSetting Procedures Setup Menu DisplayMenu Display Submenu DisplayPreset Menu Preset Menu DisplayPosition Setting Position SET To Set Panning/Tilting PositionsPan Offset To Set the Lens Zoom and Focus PositionsPreset Identification Setting Preset ID Light Control Setting ALC/MANUAL Scene File Setting Scene FileTo Return to the Preset Setting Menu Dwell Time Dwell TimeDeleting Preset Positions Preset Speed Setting Preset SpeedTo Return to the Preset Number Set Menu To Return to the Setup MenuHome Position Setting Home Self Return Setting SelfAuto Mode Selection Auto OFF SEQ Sort Auto PAN PatrolZoom →PUSH SET RET SEQ Sort Patrol Auto Pan Key Setting Auto PAN KEYDigital Flip Setting Digital Flip New Password Password VerificationSpecial 1 Menu Setting Special Privacy Zone Privacy ZoneSettings for on Nesw Proportional Pan/Tilt PROPO. P/TArea Title Area Title Zoom ratioSetting for on User Area Title EditingPatrol-learn and Patrol Play Patrol To Quit EditingPatrol Learn with a Controller Having Patrol Key PAN/TILT/ZOOM/FOCUS Iris Shutter AGC Sens UP White BalanceAlarm Input/Output Alarm IN/OUT Patrol Play with a Controller Having the Patrol KeyPatrol Play with a Controller not Having the Patrol Key Patrol Play with the Auto PAN KeyCNT-CLS 1, 2 Output Cleaning CleaningElectronic Zoom EL-ZOOM Tilt Angle Tilt Angle 0 /5 Preset Alarm Preset ALMImage Hold Image Hold Camera Identification Camera ID Camera SettingTo Display the Camera Setting Menu ALC Mode with SUPER-D2 on Electronic Sensitivity Enhancement Sens UP Shutter Speed Setting ShutterGain Control AGC on LOW/ MID/ HIGH/OFF Line-lock Sync Mode LL Synchronization SyncWhite Balance White BAL Auto-Tracing White Balance Mode ATW1/ ATW2Automatic White Balance Control Mode AWC Motion Detector Motion DET Auto Focus Setting AF Mode Resolution ResolutionSpecial 2 Menu SPECIAL2 Auto S Auto M Auto L Manual L Manual M Manual SBlack and White Mode BW Mode BW SettingPIX Sens UP Setting Burst BW SettingPIX OFF Setting PIX OFF Camera Resetting Camera ResetTo Restore the Camera Default Position Refresh Reset to the Factory Default SettingsChanging the Camera Communication Parameters RS485 SetupInitial Camera Communication Parameters Factory Default Setting Menu SettingPreset Menu Preset ID ALC/MANUAL SUPER-D2 OFF Dwell Time CNT-CLS OFF Coax ALM OUTInstallation Setting the SwitchesPrecautions RS485 Parameter SetupFor Panasonic’s Protocol Unit NumberUnit Sideway Cable Exit RS485 SettingAssemble the Camera Hook the fall prevention wire on the camera mounting base Accessory Connector Information How to Assemble the Cable with the Accessory ConnectorConnect this to 24 V AC Class 2 Power Supply only ConnectionsAlarm in Connections Alarm OUT ConnectionsRS485 Connection OUTSystem Connections Specifications WV-CS854BWV-CS2SH AccessoriesOptional Accessories Appendix ShortcutsImprimé au Japon