Panasonic WV-CS854B Deleting Preset Positions, Preset Speed Setting Preset Speed

Page 22

See the pages below for the settings respectively. Shutter speed: page 36

AGC: page 36

Electronic sensitivity enhancement: page 36

White balance: page 38

Motion detector: page 39

Auto focus: page 40

●Preset Speed Setting (PRESET SPEED)

Move the cursor to PRESET SPEED and select a speed with the joystick.

PRESET NO. 1*
POSITION SET
PRESET ID	ON
ALC/MANUAL	ALC
DWELL TIME	10S
SCENE FILE	1
PRESET SPEED	••••••••
	L	H

RET DEL

●To Return to the Preset Number Set Menu

Move the cursor to RET and press the CAM (SET) key. The PRESET NUMBER SET menu appears with the * mark on the right of the preset position number.

PRESET NO. 1*
POSITION SET
PRESET ID	ON
ALC/MANUAL	ALC
DWELL TIME	10S
SCENE FILE	1
PRESET SPEED	••••••••
	L	H

RET DEL

●To Return to the Setup Menu

Move the cursor to RET and press the CAM (SET) key.

** PRESET NUMBER SET **

1*	2	3	4
5	6	7	8
9	10	11	12
13	14	15	16
17	18	19	20
21	22	23	24
25	26	27	28
29	30	31	32
ID:DOOR
33-64	RET

■Deleting Preset Positions

1.Move the cursor to PRESET 1 and select the position number to be deleted with the joystick.

** SET UP MENU **

PRESET 1

MAP

HOME POSITION OFF

SELF RETURN OFF

AUTO MODE OFF

AUTO PAN KEY AUTO PAN

DIGITAL FLIP ON

SPECIAL1

CAMERA

RS485 SET UP

PASSWORD LOCK OFF

2.Press the CAM (SET) key to display the preset setting menu.

3.Move the cursor to DEL and press the CAM (SET) key.

PRESET NO. 1*
POSITION SET
PRESET ID	ON
ALC/MANUAL	ALC
DWELL TIME	10S
SCENE FILE	1
PRESET SPEED	••••••••
	L	H

RET DEL

This deletes the preset position and the PRESET NUMBER SET menu appears. The * mark on the right of the number disappears.

** PRESET NUMBER SET **

	1	*	2	3	4
5			6	7	8
9			10	11	12
13			14	15	16
17			18	19	20
21			22	23	24
25			26	27	28
29			30	31	32
	ID:DOOR
33-64			RET

Note: Your selected preset number is cancelled only in the SEQ and SORT mode. The previously set parameters (for PAN, TILT positions, etc.) are not changed. If you want to change these parameters, you must set them again.

-22-

Image 22

Contents Color Cctv Camera English Version Important Safety Instructions EnglishPage Contents Preface FeaturesDigital Flip Operation Camera Cleaning PrecautionsPreset Data Uploading or Down Loading Self-diagnosis Function ConsumablesDo not aim the camera at the same object for a long time Prevention of blooming and smearConstruction Setup Setup MenuAUTO/ON/OFF P WV-CU161C WV-RM70 Preset IDMON ESC CAM SET Prog SWSetup Menu Description Camera Synchronization Sync Shutter Speed ShutterGain Control AGC Important Notices10Special 2 Menu SPECIAL2 Auto Focus AF ModeRS485 Communication 11Self-diagnosis FunctionMenu Display Setting ProceduresSetup Menu Display Submenu DisplayPosition Setting Position SET Preset MenuPreset Menu Display To Set Panning/Tilting PositionsPan Offset To Set the Lens Zoom and Focus PositionsPreset Identification Setting Preset ID To Return to the Preset Setting Menu Light Control Setting ALC/MANUALScene File Setting Scene File Dwell Time Dwell TimeTo Return to the Preset Number Set Menu Deleting Preset PositionsPreset Speed Setting Preset Speed To Return to the Setup MenuAuto Mode Selection Auto Home Position Setting HomeSelf Return Setting Self OFF SEQ Sort Auto PAN PatrolZoom →PUSH SET RET Digital Flip Setting Digital Flip Auto Pan Key Setting Auto PAN KEYSEQ Sort Patrol New Password Password VerificationSpecial 1 Menu Setting Special Privacy Zone Privacy ZoneArea Title Area Title Settings for on NeswProportional Pan/Tilt PROPO. P/T Zoom ratioSetting for on User Area Title EditingPatrol Learn with a Controller Having Patrol Key Patrol-learn and Patrol Play PatrolTo Quit Editing PAN/TILT/ZOOM/FOCUS Iris Shutter AGC Sens UP White BalancePatrol Play with a Controller not Having the Patrol Key Alarm Input/Output Alarm IN/OUTPatrol Play with a Controller Having the Patrol Key Patrol Play with the Auto PAN KeyElectronic Zoom EL-ZOOM Cleaning CleaningCNT-CLS 1, 2 Output Image Hold Image Hold Preset Alarm Preset ALMTilt Angle Tilt Angle 0 /5 To Display the Camera Setting Menu Camera SettingCamera Identification Camera ID ALC Mode with SUPER-D2 on Gain Control AGC on LOW/ MID/ HIGH/OFF Shutter Speed Setting ShutterElectronic Sensitivity Enhancement Sens UP Line-lock Sync Mode LL Synchronization SyncAutomatic White Balance Control Mode AWC Auto-Tracing White Balance Mode ATW1/ ATW2White Balance White BAL Motion Detector Motion DET Special 2 Menu SPECIAL2 Auto Focus Setting AF ModeResolution Resolution Auto S Auto M Auto L Manual L Manual M Manual SPIX Sens UP Setting Black and White Mode BW ModeBW Setting Burst BW SettingTo Restore the Camera Default Position Refresh PIX OFF Setting PIX OFFCamera Resetting Camera Reset Reset to the Factory Default SettingsInitial Camera Communication Parameters RS485 SetupChanging the Camera Communication Parameters Preset Menu Preset ID ALC/MANUAL SUPER-D2 OFF Dwell Time Factory Default SettingMenu Setting CNT-CLS OFF Coax ALM OUTPrecautions InstallationSetting the Switches RS485 Parameter SetupFor Panasonic’s Protocol Unit NumberUnit Assemble the Camera RS485 SettingSideway Cable Exit Hook the fall prevention wire on the camera mounting base Connect this to 24 V AC Class 2 Power Supply only Accessory Connector InformationHow to Assemble the Cable with the Accessory Connector ConnectionsRS485 Connection Alarm in ConnectionsAlarm OUT Connections OUTSystem Connections Specifications WV-CS854BOptional Accessories AccessoriesWV-CS2SH Appendix ShortcutsImprimé au Japon