Panasonic WV-CS854B operating instructions Optional Accessories, WV-CS2SH

Page 54

	Panning Range	360 ° endless
	Panning Angle Setting	possible (in auto-pan mode)
	Panning Mode	manual/sequential position/sort position/auto pan
	Panning Speed	manual : approx. 0.1 °/s - 120 °/s 8-steps/64-steps
	Panning Speed	sequence position : maximum approx. 300 °/s
		sequence position : maximum approx. 300 °/s

	Tilting Range	0 ° to 180 ° (–5 ° to 185 ° at 5 ° tilt angle setting)
	Tilting Mode	manual/sequential position/sort position
	Tilting Speed	manual : approx. 0.1 °/s - 120 °/s. 8-steps/64-steps
	Tilting Speed	sequential position : maximum approx. 300 °/s
		sequential position : maximum approx. 300 °/s

	Controls	pan/tilt, lens, 64 preset positions, home position

Weights and dimensions indicated are approximate.

Specifications are subject to change without notice.

ACCESSORIES

Operating Instructions (this document)	1 pc.
The following parts are for installation:
Decoration Cover	1 pc.
Alarm In Cable	1 pc.
Alarm Out Cable	1 pc.
Connector for 24 V AC	1 pc.

OPTIONAL ACCESSORIES

Dome Cover (approx. 60 % transparency, smoked type)	WV-CS2S
Dome Cover (approx. 50 % transparency, smoked type)	WV-CS2SH
Dome Cover (approx. 70 % transparency, metal type)	WV-CS2M

-54-

Image 54

Contents Color Cctv Camera English Version Important Safety Instructions EnglishPage Contents Features PrefaceDigital Flip Operation Precautions Camera CleaningPreset Data Uploading or Down Loading Self-diagnosis Function ConsumablesDo not aim the camera at the same object for a long time Prevention of blooming and smearConstruction Setup Setup MenuAUTO/ON/OFF P WV-CU161C WV-RM70 Preset IDMON ESC CAM SET Prog SWSetup Menu Description Camera Synchronization Sync Shutter Speed ShutterGain Control AGC Important Notices10Special 2 Menu SPECIAL2 Auto Focus AF ModeRS485 Communication 11Self-diagnosis FunctionMenu Display Setting ProceduresSetup Menu Display Submenu DisplayPosition Setting Position SET Preset MenuPreset Menu Display To Set Panning/Tilting PositionsPan Offset To Set the Lens Zoom and Focus PositionsPreset Identification Setting Preset ID To Return to the Preset Setting Menu Light Control Setting ALC/MANUALScene File Setting Scene File Dwell Time Dwell TimeTo Return to the Preset Number Set Menu Deleting Preset PositionsPreset Speed Setting Preset Speed To Return to the Setup MenuAuto Mode Selection Auto Home Position Setting HomeSelf Return Setting Self OFF SEQ Sort Auto PAN PatrolZoom →PUSH SET RET Auto Pan Key Setting Auto PAN KEY Digital Flip Setting Digital FlipSEQ Sort Patrol New Password Password VerificationSpecial 1 Menu Setting Special Privacy Zone Privacy ZoneArea Title Area Title Settings for on NeswProportional Pan/Tilt PROPO. P/T Zoom ratioSetting for on User Area Title EditingPatrol Learn with a Controller Having Patrol Key Patrol-learn and Patrol Play PatrolTo Quit Editing PAN/TILT/ZOOM/FOCUS Iris Shutter AGC Sens UP White BalancePatrol Play with a Controller not Having the Patrol Key Alarm Input/Output Alarm IN/OUTPatrol Play with a Controller Having the Patrol Key Patrol Play with the Auto PAN KeyCleaning Cleaning Electronic Zoom EL-ZOOMCNT-CLS 1, 2 Output Preset Alarm Preset ALM Image Hold Image HoldTilt Angle Tilt Angle 0 /5 Camera Setting To Display the Camera Setting MenuCamera Identification Camera ID ALC Mode with SUPER-D2 on Shutter Speed Setting Shutter Gain Control AGC on LOW/ MID/ HIGH/OFFElectronic Sensitivity Enhancement Sens UP Line-lock Sync Mode LL Synchronization SyncAuto-Tracing White Balance Mode ATW1/ ATW2 Automatic White Balance Control Mode AWCWhite Balance White BAL Motion Detector Motion DET Special 2 Menu SPECIAL2 Auto Focus Setting AF ModeResolution Resolution Auto S Auto M Auto L Manual L Manual M Manual SPIX Sens UP Setting Black and White Mode BW ModeBW Setting Burst BW SettingTo Restore the Camera Default Position Refresh PIX OFF Setting PIX OFFCamera Resetting Camera Reset Reset to the Factory Default SettingsRS485 Setup Initial Camera Communication ParametersChanging the Camera Communication Parameters Preset Menu Preset ID ALC/MANUAL SUPER-D2 OFF Dwell Time Factory Default SettingMenu Setting CNT-CLS OFF Coax ALM OUTPrecautions InstallationSetting the Switches RS485 Parameter SetupFor Panasonic’s Protocol Unit NumberUnit RS485 Setting Assemble the CameraSideway Cable Exit Hook the fall prevention wire on the camera mounting base Connect this to 24 V AC Class 2 Power Supply only Accessory Connector InformationHow to Assemble the Cable with the Accessory Connector ConnectionsRS485 Connection Alarm in ConnectionsAlarm OUT Connections OUTSystem Connections Specifications WV-CS854BAccessories Optional AccessoriesWV-CS2SH Appendix ShortcutsImprimé au Japon