Panasonic WV-CS854B operating instructions Dwell Time Dwell Time, Light Control Setting ALC/MANUAL

FLOOR 1

DOOR

To Enter the Next ID without Returning to the Preset Setting Menu

(1)In the preset ID setting menu, move the cursor to the top line and select a desired position number with the joystick.

(2)Enter, copy, change or delete the ID as described above.

PRESET NO. 1* 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;&#!?= +-*/%$

SPACE

COPY POSI RET RESET

DOOR............

** MANUAL CONT **

IRIS ••••••••

CLOSE OPEN

RET

●Dwell Time (DWELL TIME)

•Move the cursor to DWELL TIME and set a dwell time with the joystick. The factory default setting is

10S. Dwell time changes as follows:

S stands for second(s), and MIN stands for minute(s).

PRESET NO. 1*
POSITION SET
PRESET ID	ON
ALC/MANUAL	ALC
DWELL TIME	10S
SCENE FILE	1
PRESET SPEED	••••••••
	L	H

RET DEL

To Return to the Preset Setting Menu

Move the cursor to RET and press the CAM (SET) key.

●Light Control Setting (ALC/MANUAL)

1.Move the cursor to ALC/MANUAL and select ALC or MANUAL with the joystick.

The factory default setting is ALC.

ALC: The lens iris is automatically adjusted to suit the brightness of the object.

MANUAL: The lens iris is fixed at the set value regardless of the brightness of the object.

PRESET NO. 1*
POSITION SET
PRESET ID	ON
ALC/MANUAL	ALC
DWELL TIME	10S
SCENE FILE	1
PRESET SPEED	••••••••
	L	H

RET DEL

2.In case of ALC O

Press the CAM (SET) key. The backlight compensation menu appears on the monitor screen. See page 35 for the setting.

3.In case of MANUAL O

Press the CAM (SET) key. The setting menu appears on the monitor screen. Set the lens iris level as desired with the joystick.

-21-

●Scene File Setting (SCENE FILE)

1.To set a scene file number

Move the cursor to SCENE FILE and select a scene file number (1 to 10, or OFF) with the joystick. The factory default setting is 1. No scene file is selected at OFF.

PRESET NO. 1*
POSITION SET
PRESET ID	ON
ALC/MANUAL	ALC
DWELL TIME	10S
SCENE FILE	1
PRESET SPEED	••••••••
	L	H

RET DEL

2.To set scene file details

Move the cursor to a scene file number and press the CAM (SET) key. The setting menu appears.

** SCENE FILE 1 **

SHUTTER	AUTO
AGC	ON(MID)
SENS UP	OFF
WHITE BAL	ATW1
MOTION DET	1
AF MODE	MANUAL L
RET