Samsung SCC-C6475(P) manual Important Safety Instructions

Page 2

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.

8.Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

13.Unplug this apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Safety Precautions

The purpose of this information is to ensure proper use of this product to prevent danger or damage to property. Please be sure to observe all precautions.

*The precautions are divided into "Warnings" and "Cautions" as distinguished below:

Warning: Ignoring this warning may result in death or serious injury.

Caution: Ignoring this caution may result in injury or damage to property.

 

 

 

 

 

 

 

 

 

 

 

 

 

Warning instructions alert you to

 

 

Caution instructions alert you to the

 

 

a potential risk of death

 

 

potential risk of injury or

 

 

or serious injury.

 

 

damage to property.

 

 

 

 

 

 

 

 

 

 

 

 

 

Warning

1.Be sure to use only the standard adapter which is specified in the specification sheet.

Using any other adapter could cause fire, electrical shock, or damage to the product.

2.When connecting the power supply and signal wires, check the external connection terminals before connecting them. Connect the alarm signal wires to the alarm terminals, the AC adapter to the AC power input receptacle, and the DC adapter to the DC power input, making sure that the correct polarity is observed.

(Connecting the power supply incorrectly may cause fire, electrical shock, or damage to the product.)

3.Do not connect multiple cameras to a single adapter.

(Exceeding the capacity may cause abnormal heat generation or fire.) (A falling camera may cause personal injury.)

4.Securely plug the power cord into the power receptacle. (Insecure connection may cause fire.)

5.When installing the camera on a wall or ceiling, fasten it securely and firmly. (A falling camera may cause personal injury.)

E

Image 2
Contents SCC C6475P Important Safety Instructions FCC Statement Before Usage Table of contents Chapter CC-C6475 P Overvi ewSCC-C6475P Introduction Locations of ControlAdapter Connection SCC-C6475P Adapter BoardSetting communication Protocol Initial SettingSetting RS-422A/RS-485 termination Baud Rate SettingCC- C6475P Installatio n Factory DefaultBefore Installing Ceiling Mount Bracket SBR-100DCM Wall Mount Adaptor SADT-100WMCeiling Mount Adaptor SADT-100CM Indoor Housing SHG-120Outdoor Housing SHG-220 Pole Mount Adaptor SADT-100PMInstalling the Camera MatchCase of using xDSL/Cable Internet network and IP router Network Manual OverviewPage Example http//192.168.1.20181 Case of connecting more than 2 cameras to one IP routerHttp Port Case of connecting more than 2 cameras to an IP router Case of using the LAN and IP router Example No.1 SCC-C6475P IP Subnet Mask Gateway Page RJ-45 Cross Lan Cable will be enclosed with products Example IP Subnet mask Gateway Page Setting the IP Case of connecting the camera in the intranet LANLog Title bar and the upper menuChoice of camera and channel Viewer ScreenLogo and Video Format Screen Size/Alarm/Banner window display Screencapture/record/playVideo Image screen adjustmentSetting the basic function Page User Language PresetCamera Setting the system StatusIP Filter LogSoftware Update ResetOverlay Image LayoutParameter Overlay Text Screen Look View Html CodeAlarm Setup AlarmTransfer Setup Alarm Priority SET PortNetwork NetworkIP Notification Setup Menu Overvie w Network Terms DefinitionStructure of the Setup Menu Exit QUIT/SAVECamera ID Camera SET MenuSync COLOR/BW Motion DETVideo SET Menu Motion ShutterAGC AGC GainWhite BAL DISSpecial PresetFocus Mode FocusZone SET Pryvacy Zone MAP Blank ALL AboveBlank ALL below SET Zone Area Reverse SET ZoomZone DIR SET Zone AreaAuto SET Speed DirectionEndless PatternAlarm SET Other SET Short Keys System InfoInstallation of IP router SpecificationsSetting the IP sharing setting Example Linksys model WRT54G LoginConnecting the Internet Port Forwarding Be sure to read this Set the Time zoneVerify the Connection state Setting the IP router Example Netgear model RP614v2 Access Setting the internet connectionVerify the connection status Setting IP router Example D-Link model DI-624+ Run WizardTime zone Password for RouterFirst screen Cable ModemRestart Wireless LANEncryption Checking the Connection Port Forwarding Be sure to readProduct specifications