Samsung SCC-C6475(P) manual Wireless LAN, Encryption, Restart

Page 66

1.In case of using Cable, press the “Back” button.

2.Select “Dynamic IP Address”.

3.Press the “Next” button.

4.Enter “MAC Address” in the bottom of the router and press the “Clone MAC Address” button.

5.Press the “Next” button and move to the 7th step.

6-3 Static (Fixed) IP

1.In case of Static (Fixed) IP, press the “Back” button.

2.Select “Static IP Address”.

3.Press the “Next” button.

4.Enter “IP Address/Subnet Mask/Gateway/DNS”.

Note Contact the network manager in case of not knowing the above value.

5.Press the “Next” button.

7.Wireless LAN

1.In case of not using Wireless LAN, press the “Next” button.

Note In case of using Wireless LAN, Enter SSID and Channel, and press the “Next” button.

8.Encryption

1.In case of not using Encryption, press the “Next” button.

Note In case of using Encryption, mark to “Enabled” and select web password format, and enter “Key” and then press the “Next” button.

9.Restart

1.In case of displaying the screen as left, the internet connection is achieved successfully. Press the “Restart” button to restart the router.

E

5-14

5-15

Image 66

Contents SCC C6475P Important Safety Instructions FCC Statement Before Usage Table of contents Chapter CC-C6475 P Overvi ewSCC-C6475P Introduction Locations of ControlAdapter Connection SCC-C6475P Adapter BoardSetting communication Protocol Initial SettingSetting RS-422A/RS-485 termination Baud Rate SettingCC- C6475P Installatio n Factory DefaultBefore Installing Ceiling Mount Bracket SBR-100DCM Wall Mount Adaptor SADT-100WMCeiling Mount Adaptor SADT-100CM Indoor Housing SHG-120Outdoor Housing SHG-220 Pole Mount Adaptor SADT-100PMInstalling the Camera MatchCase of using xDSL/Cable Internet network and IP router Network Manual OverviewPage Case of connecting more than 2 cameras to one IP router Http PortExample http//192.168.1.20181 Case of connecting more than 2 cameras to an IP router Case of using the LAN and IP router Example No.1 SCC-C6475P IP Subnet Mask Gateway Page RJ-45 Cross Lan Cable will be enclosed with products Example IP Subnet mask Gateway Page Setting the IP Case of connecting the camera in the intranet LANLog Title bar and the upper menuViewer Screen Logo and Video FormatChoice of camera and channel Screen Size/Alarm/Banner window display Screencapture/record/playImage screen adjustment Setting the basic functionVideo Page User Preset CameraLanguage Setting the system StatusIP Filter LogSoftware Update ResetLayout ParameterOverlay Image Overlay Text Screen Look View Html CodeAlarm Transfer SetupAlarm Setup Alarm Priority SET PortNetwork NetworkIP Notification Setup Menu Overvie w Network Terms DefinitionStructure of the Setup Menu Exit QUIT/SAVECamera SET Menu SyncCamera ID COLOR/BW Motion DETVideo SET Menu Motion ShutterAGC AGC GainWhite BAL DISSpecial PresetFocus Mode FocusZone SET Blank ALL Above Blank ALL below SET Zone AreaPryvacy Zone MAP Reverse SET ZoomZone DIR SET Zone AreaAuto SET Speed DirectionEndless PatternAlarm SET Other SET Short Keys System InfoInstallation of IP router SpecificationsLogin Connecting the InternetSetting the IP sharing setting Example Linksys model WRT54G Set the Time zone Verify the Connection statePort Forwarding Be sure to read this Setting the IP router Example Netgear model RP614v2 Access Setting the internet connectionVerify the connection status Setting IP router Example D-Link model DI-624+ Run WizardTime zone Password for RouterFirst screen Cable ModemWireless LAN EncryptionRestart Checking the Connection Port Forwarding Be sure to readProduct specifications