❖Viewer Screen
●Display 704x576(PAL) or 704x480(NTSC), 640x480, 352x288(PAL) or 352x240(NTSC) as resolution.
❖Logo and Video Format
Logo
Video Format
Logo
●Displays the logo image set at the Setup ➔ Layout ➔ ScreenLook.
●Samsung electronics logo is set as the initial state.
●If the logo link is set, clink the logo image and the linked address screen will be displayed.
Video Format
●Displays the information of the image format(MJPEG/MPEG4) that is being shown.
❖Choice of camera and channel
Camera List
Sequence Mode |
|
|
|
| Next Camera |
|
|
|
| ||
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
1ch/4ch
Camera list
●The top item shows the log in camera, and the below items show the added camera item in the Setup ➔ Basic Configuration ➔ Camera.
●The item that has the reversed character is selected by the correspond to the camera that the image is being shown.
●If you choose the other camera in the list, the selected camera image will be displayed.
Sequence Mode
●Sequence Mode that is set in the Setup ➔ Basic Configuration ➔ Camera will be executed.
●If the Sequence Mode is being executed, the other buttons in the main page is
●Stopping the Sequence Mode, the camera that is being shown at the stop
●Sequence Mode function can be executed at both 1ch and 4 ch.
1ch/4ch
●The channel can be changed such as 1ch ➔ 4ch, 4ch ➔ 1ch.
●In case of 4ch, other buttons in the Main page is
●In case of changing 4ch ➔ 1ch, Log in camera (address window IP camera)will be selected.
E