Samsung SCC-C6475(P) manual White BAL, Dis

Page 49

WHITE BAL

Lights are generally denoted as color temperatures and expressed in Kelvin (K) units.

The general light color temperatures are shown below.

10000K

Blue sky

9000K

Rainy

 

8000K

 

7000K

Cloudy

 

6000K

Partly Cloudy

5000K

Sunny

 

4000K

Fluorescent lamp

3000K

Halogen lamp

You can select one of four modes for white balance adjustment as follows:

-ATW1/ATW2(Auto-Tracing White Balance Mode): In these modes, the color temperature is monitored continuously and thereby white balance is set automatically. The following are the approximate supported color temperature ranges in these modes.

ATW1 : 2500K ~ 9300K(1)

ATW2 : 2000K ~ 10000K(Mode recommended for sodium lighting)(2)

1. If the color temperature is out of this range in ATW1 mode, proper white balance may not be obtained. In that case, select ATW2 mode.

2. In ATW2 mode, if one color is dominated in the shooted area, the color can be displayed differently.

Therefore, select the mode which is appropriate for the environment.

-AWC(Auto-Tracing White Balance Control): In this mode, accurate white balance is obtained by pressing [ENTER] while having a white paper in front of the camera. White Balance data will be maintained after set it once. AWC mode is best in locations where the color temperature of light source is constant.

-MANU : If WHITE BAL menu is set to MANU mode, the user can set the white Balance considering the current illumination. Select MANU item and press [ENTER], the sub screen where you can select Manual White Balance will be shown. Use the left/right keys to select 3200K, 5600K or OFF(USER) mode in the PRESET menu.

-3200K : Set color temperature to 3200K

-5600K : Set color temperature to 5600K

-USER : Choose out a proper value from the RED and BLUE graph for color and temperature setup.

E

2000K

Tungsten lamp

Candlelight

1000K

 

 

(VIDEO SET)

 

 

 

 

 

 

 

 

IRIS

ALC...

 

 

 

SHUTTER

OFF

 

 

 

AGC

ON

 

 

 

WHITE BAL

 

MANU...

 

 

 

DIS

ON

 

 

 

FOCUS MODE

AF

 

 

 

SPECIAL

...

 

 

 

EXIT

QUIT

 

 

 

 

 

 

 

 

 

 

 

 

 

Press [Enter]

(AWB/MANU)

PRESET 3200K

RET

DIS

The DIS(Digital Image Stabilization) function compensates the camera screen shaking incurred from vibration.

It is recommended to deactivate the DIS function in the no vibration environment.

4-12

4-13

Image 49
Contents SCC C6475P Important Safety Instructions FCC Statement Before Usage Table of contents CC-C6475 P Overvi ew ChapterLocations of Control SCC-C6475P IntroductionSCC-C6475P Adapter Board Adapter ConnectionSetting RS-422A/RS-485 termination Initial SettingSetting communication Protocol Baud Rate SettingFactory Default CC- C6475P Installatio nBefore Installing Wall Mount Adaptor SADT-100WM Ceiling Mount Bracket SBR-100DCMOutdoor Housing SHG-220 Indoor Housing SHG-120Ceiling Mount Adaptor SADT-100CM Pole Mount Adaptor SADT-100PMMatch Installing the CameraNetwork Manual Overview Case of using xDSL/Cable Internet network and IP routerPage Http Port Case of connecting more than 2 cameras to one IP routerExample http//192.168.1.20181 Case of connecting more than 2 cameras to an IP router Case of using the LAN and IP router Example No.1 SCC-C6475P IP Subnet Mask Gateway Page RJ-45 Cross Lan Cable will be enclosed with products Example IP Subnet mask Gateway Page Case of connecting the camera in the intranet LAN Setting the IPTitle bar and the upper menu LogLogo and Video Format Viewer ScreenChoice of camera and channel Screencapture/record/play Screen Size/Alarm/Banner window displaySetting the basic function Image screen adjustmentVideo Page User Camera PresetLanguage Status Setting the systemLog IP FilterReset Software UpdateParameter LayoutOverlay Image Overlay Text View Html Code Screen LookTransfer Setup AlarmAlarm Setup Port Alarm Priority SETNetwork NetworkIP Notification Network Terms Definition Setup Menu Overvie wExit QUIT/SAVE Structure of the Setup MenuSync Camera SET MenuCamera ID Motion DET COLOR/BWVideo SET Menu AGC ShutterMotion AGC GainDIS White BALFocus Mode PresetSpecial FocusZone SET Blank ALL below SET Zone Area Blank ALL AbovePryvacy Zone MAP Zone DIR SET SET ZoomReverse Zone AreaAuto SET Endless DirectionSpeed PatternAlarm SET Other SET System Info Short KeysSpecifications Installation of IP routerConnecting the Internet LoginSetting the IP sharing setting Example Linksys model WRT54G Verify the Connection state Set the Time zonePort Forwarding Be sure to read this Setting the internet connection Setting the IP router Example Netgear model RP614v2 AccessVerify the connection status Run Wizard Setting IP router Example D-Link model DI-624+First screen Password for RouterTime zone Cable ModemEncryption Wireless LANRestart Port Forwarding Be sure to read Checking the ConnectionProduct specifications