Samsung SCC-C6475(P) manual Set the Time zone, Verify the Connection state

3. Set the Time zone

1.Select the “Time Zone”.

2.Press the “Save Settings”.

4.Verify the Connection state.

The way to verify the setting state is as follows.

1.Press the “Status”.

2.Verify the data below Internet Configuration Type.

3.In case of using Cable or ADSL:

Press the “Connect” button if the login is "Disconnected". If fail again, retry from Step1 (Connection).

4.Remember the IP/Subnet mask/Gateway of connection, and it will be helpful to install SCC-C6475(P) afterwards.

5. Port Forwarding (Be sure to read this.)

1.Click the “Applications and Gaming”.

2.Click the “Port Range Forward”.

3.Port forwarding

➀First line: Application: Enter HTTP Start and End: Enter 80 both Protocol: Select TCP

IP Address: 192.168.1.2 ~ 255

Enable: Select

➁Second line: Application: Enter TCP Start: Enter 554 (RTSP Port)

555 (TCP Streaming Port) End: Enter 556 (Upload Server Port) Protocol: Select the “TCP”.

IP Address: The same IP with HTTP

Enable: Select

➂Third line: Application: Enter UDP Start: Enter 8000 End: Enter 8009 Protocol: Select UDP

IP Address: Enter the same IP with HTTP/TCP

Enable: Select

Warning Be sure to memorize the above setting value to use the SCC-C6475(P) setting.

4.Press the “Save Settings”.

5.Close the Internet browser.

E

5-4 5-5