SET ZOOM
Press [ENTER] at the “SET ZOOM...” position to enter the ZOOM setup screen. After ZOOM setup, the PRIVACY ZONE function will be in action only at the higher magnification than the Zoom magnification
as set.
ZONE DIR SET
Press the [Enter] key in the “ZONE DIR SET ON…” mode to enter the NORTH SET screen. MAP. Move PAN to set the NORTH position and press [ENTER]. Based on the North position,the direction of N(North),
PRIVACY ZONE SET 0
SET ZONE AREA | ON... | |
SET ZOOM |
| ... |
REVERSE | OFF | |
➜
SET ZOOM
Caution ZONE DIR/AREA OSD is not displayed in the network viewer.
Press [Enter]
(ZONE SET) |
| |
PRIVACY ZONE | ... | |
ZONE DIR SET |
| ON... |
ZONE AREA SET | OFF | |
➜
SET NORTH
E
EXITQUIT
Press [Enter]
N
REVERSE
The REVERSE function applies PRIVACY MASK to the other area than set as a privacy zone. ON/OFF is available.
PRIVACY ZONE SET 0
SET ZONE AREA | ON... | |
SET ZOOM | ... | |
REVERSE |
| ON |
EXITQUIT
ZONE AREA
Press [ENTER] to enter the ZONE AREA MAP screen from “ZONE
AREA SET...”. Select a ZONE AREA number from the ZONE AREA MAP
screen and press [ENTER] to enter the ZONE AREA setup screen.
EXIT | QUIT |
EXIT
"QUIT" : Does not save the selected information and returns to a higher menu.
"SAVE" : Do saves the selected information and returns to a higher menu.
"DEL" : Deletes the selected information and restores the DEFAULT. Then returns to a higher menu.
ZONE DIR SET/ZONE AREA SET
This function indicates the ID or direction depending on the set value when PAN of
| (ZONE SET) |
|
|
|
|
| |
| PRIVACY ZONE | ... |
|
| ZONE DIR SET | OFF |
|
| ZONE AREA SET | ON... |
|
| EXIT | QUIT |
|
|
|
|
|
|
|
|
|
➜
Press [Enter]
➜
Press [Enter]
ZONE AREA SET 0
LOCATION |
| ... |
ZONE ID SET | ... | |
ZONE ENABLE | ON | |
(ZONE AREA MAP)
0 | * | 1 | 2 | 3 | |
4 | 5 | 6 | 7 | ||
|
RET
it indicates the ID of the selected area and if set to
EAST), E(EAST),
EXITQUIT